Summary
This document proposes the supersedure of an existing airworthiness directive (AD), applicable to certain Saab Model SAAB SF340A and SAAB 340B series airplanes, that currently requires inspections to detect damage or cracking of the forward and aft attachment lugs of the flap fittings at wing station (WS) 123.38; an inspection to verify that the sizes of the holes of the flap fittings are within specified limits and to ensure that the swaged bushings are not loose; and modification of the flap fittings. This action would require repetitive accomplishment of the inspections using improved inspection methods; a one-time visual and repetitive general visual and detailed visual inspections; new repetitive non-destructive test (NDT) inspections; and corrective and follow-on actions, as necessary. This action also would provide for terminating action for all repetitive inspections and would revise the applicability of the existing AD. The actions specified by the proposed AD are intended to prevent high bearing stress on the bushings of the flap fittings, which could result in wear on the bushings, cracking of the flap fittings, and breakage of the lugs; these conditions could result in jamming of the flaps and consequent reduced controllability of the airplane.