Summary
This document proposes to adopt a new airworthiness directive (AD) that would apply to certain Cessna Aircraft Company (Cessna) P206, TP206, TU206, U206, 207, T207, 210, P210, and T210 series airplanes. This proposed AD would require you to visually inspect certain horizontal stabilizer attachment reinforcement brackets for the existence of seam welds and replace any reinforcement bracket found without seam welds. This proposed AD authorizes the pilot to check the logbooks to determine whether one of the affected horizontal stabilizer attachment reinforcement brackets is installed. This proposed AD is the result of a report that certain parts were manufactured without seam welds. The actions specified by this proposed AD are intended to detect and replace structurally deficient horizontal stabilizer attachment brackets. Continued use of such brackets could result in structural failure of the horizontal stabilizer with reduced or loss of control of the airplane.