Summary
The FAA proposes to supersede Airworthiness Directive (AD) 2002-19-10, which applies to certain Air Tractor, Inc. (Air Tractor) Models AT-402, AT-402A, AT-402B, AT-602, AT-802, and AT-802A airplanes. AD 2002-19-10 currently requires you to repetitively inspect the upper longeron and upper diagonal tube on the left hand side of the aft fuselage structure for cracks and contact the manufacturer for a repair scheme if cracks are found. This proposed AD is the result of reports of the same cracks recently found on AT-500 series airplanes. The manufacturer has also issued new and revised service information that incorporates a modification to terminate the repetitive inspection requirements. Consequently, this proposed AD would retain the inspection actions required in AD 2002-19-10, would add certain AT-500 series airplanes to the applicability section, would change the compliance times, and would incorporate new and revised manufacturer service information that contains a terminating action for the repetitive inspection requirement. We are issuing this proposed AD to detect and correct cracks in the upper aft longeron, which could cause the fuselage to fail. Such failure could result in loss of control of the airplane.