Summary
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
A number of wings manufactured by Diamond Aircraft Industries Inc. in Canada have been found to exhibit voids in the adhesive joint between the main spar caps and the upper wing skins. The available information indicates that wings with voids continue to meet the certification design limits, provided the voids are within established criteria. However, to detect any wings that may have voids exceeding these criteria, Diamond has issued Mandatory Service Bulletin MSB-40-060 and MSB-F4-016 (single document) that describes instructions for inspection of the aircraft that had these wings installed during manufacture. Aircraft that have voids within the inspection criteria may continue to operate without restriction, pending the outcome of ongoing investigations. Aircraft that have voids exceeding the inspection criteria must be repaired.
The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.