Summary
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
A failure mode has been identified that can lead to loss of a nose wheel. Any combination of excessive wear and/or adverse tolerances on the axle inner cone, outer cone or wheel hub splined sleeve cones can result in the loss of the critical gap between the inner flange face of the wheel outer cone and the axle end face. If this gap is lost, it can result in the wheel having free play along the length of the axle. This condition, if not corrected, can result in breakage of the wheel nut lock plate leading to unscrewing of the wheel retention nut and subsequent separation of the nose wheel from the landing gear axle.
* * * * * The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.