NPRM FAA-2010-0102

Became AD 2010-13-10

Proposed airworthiness directive · Ontic Engineering and Manufacturing

Published
March 15, 2010 · 75 FR 12148
Comments due
May 14, 2010
Action
Notice of proposed rulemaking (NPRM)
Docket
FAA-2010-0102
Project
2010-NE-09-AD
FR document
2010-5549
Products
Propeller

A proposal is not in force. If adopted, it becomes an AD, usually with changes. Only the Federal Register edition is official.

Summary

The FAA proposes to adopt a new airworthiness directive (AD) for certain serial numbers (S/Ns) of Ontic Engineering and Manufacturing, Inc. propeller governors, part numbers (P/Ns) C210776, T210761, D210760, and J210761. This proposed AD would require removal of the affected propeller governors from service. This proposed AD results from three reports received of failed propeller governors. We are proposing this AD to prevent loss of propeller pitch control, damage to the propeller governor, and internal damage to the engine, which could prevent continued safe flight or safe landing.

The resulting AD

Notices in this docket · 1