Summary
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Surface defects were visually detected on the rudder of one Airbus A319 and one A321 in-service aeroplane. Investigation has determined that the defects reported on both rudders corresponded to areas that had been reworked in production. The investigation confirmed that the defects were the result of de-bonding between the skin and honeycomb core. Such reworks were also performed on some rudders fitted on A310 and A300-600 aeroplanes. An extended de-bonding, if not detected and corrected, may degrade the structural integrity of the rudder. The loss of the rudder leads to degradation of the handling qualities and reduces the controllability of theaeroplane.
The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.