NPRM FAA-2010-0736

Became AD 2010-21-09

Proposed airworthiness directive · Piaggio Aero Industries

Published
July 23, 2010 · 75 FR 43101
Comments due
September 7, 2010
Action
Notice of proposed rulemaking (NPRM)
Docket
FAA-2010-0736
Project
2010-CE-035-AD
FR document
2010-18024
Products
Aircraft

A proposal is not in force. If adopted, it becomes an AD, usually with changes. Only the Federal Register edition is official.

Summary

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

A damaged fuel heater caused a fuel leakage in the engine nacelle; investigation revealed that the damage to the fuel heater was due to chafing with an oil cooling system hose. PIAGGIO AERO INDUSTIRES (PAI) issued Service Bulletin (SB) 80- 0175, which was applicable to all aeroplanes and contained instructions for a repetitive inspection of the affected parts and, if necessary, their replacement and/or for the repositioning of oil/ fuel tubing if minimum clearances were not found.

The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.

The resulting AD

Notices in this docket · 1