Summary
We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
During a routine inspection, cracks have been found on an aeroplane at the lower wing panel rear trailing edge inboard of flap lever arm 1 (rib 5). A subsequent inspection of the other aeroplanes in that operator's fleet revealed several more aeroplanes with cracks at the same location. This condition, if not corrected, could lead to structural failure of the affected wing panel, possibly resulting in the wing separating from the airplane with consequent loss of control. * * * * *
The proposed AD would require actions that are intended to address the unsafe condition described in the MCAI.