Summary
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
* * * * * A report has been received of an incident where one of the two bolts attaching the actuator mounting bracket to the MLG [main landing gear] Shock Strut was found loose, leading to failure of the other attachment bolt, subsequently resulting in failure of the bracket.
This condition, if not detected and corrected, could prevent the MLG to extend to the full down-and-locked position, possibly resulting in MLG collapse upon landing or during roll-out, with consequent damage to the aeroplane and injury to the occupants. * * * * *
The proposed AD would require actions that are intended to address the unsafe condition describedin the MCAI.