SAIB CE-07-18

Special airworthiness information bulletin · Elevator and rudder control surface hinge halves

Issued
March 14, 2007
Products
Aircraft · Small Airplane
Makes
Raytheon Aircraft Company
Models
35, 45 (Military YT-34), 50, 95, 95-55, 95-B55, A45 (Military T-34A, B-45), B95, B95A, D45 (Military T-34B)

Advisory, not mandatory. DRS record last changed March 14, 2007.

The bulletin

Text extracted from the PDF.

FAA Aircraft Certification Service

SPECIAL AIRWORTHINESS

INFORMATION BULLETIN http://www.faa.gov/aircraft/safety/alerts/SAIB

SAIB: CE-07-18 Date: March 14, 2007 This is information only. Recommendations aren’t mandatory.

Introduction

This Special Airworthiness Information Bulletin (SAIB) informs you, a registered owner and/or operator of Raytheon Aircraft Company Models, T-34A, T-34B, L-23B, 45, 35, 95, A95, B95, B95-A, 95-55, and 95B55 airplanes with production parts that may have escaped the Raytheon Aircraft Company Quality Control System with potential problems as noted.

Background

The parts are typically hinge halves for various control surfaces. Figures 1, 2, and 3 show the typical parts and assemblies and where the forming thinning, necking, and cracking are occurring. Parts, other than those shown in the figures, which may exhibit these production flaws are:

• 35-650120-2

• 35-650120-7002

• 35-650122-2

• 45-640005-39

• 35-650120-7002

• 45-640005-43

• 95-620010-60

Recommendation

The FAA recommends that owners and operators inspect the elevator and rudder control surface hinge halves for proper part forming if parts were replaced after February of 2001. Figures 1, 2, & 3 show examples of incorrectly formed hinge halves. These examples exhibit thinning, necking, and possible cracking. If hinge halves are found with theses forming deformities, then the hinge halve or hinge assembly needs to be replaced. The manufacture has not issued any service information on this condition.

For Further Information Contact

Steven Potter, Aerospace Engineer, FAA Wichita ACO, 1801 Airport Road, Room 100, Wichita, KS 67209, telephone: (316) 946-4124, fax: (316) 946-4407, e-mail: steven.potter@faa.gov

Figure 1. Hinge Half and Hinge Assembly

Figure 2. Hinge Assembly and Hinge Half

Figure 3. Hinge Half with forming crack

35-650121-4 Hinge Assembly Formed Correctly 35-650121-2 Hinge Half Formed Incorrectly Forming Crack Correctly Formed Incorrectly Formed Forming Crack

Incorrectly Formed Hinge Half Forming Crack

Registered aircraft it may concern

Registry models matched by Raytheon 35, 45 (Military YT-34), 50 and 7 more, the same way as ADs, with the most registered aircraft first.

See all 28 models