SAIB NE-06-03

Historical

Special airworthiness information bulletin

Issued
October 18, 2005
Products
Aircraft · Rotorcraft
Makes
Schweizer Aircraft Corporation
Models
269 series rotorcraft

Advisory, not mandatory.

The bulletin

Text extracted from the PDF.

SPECIAL AIRWORTHINESS

INFORMATION BULLETIN

Aircraft Certification Service Washington, DC

U.S. Department of Transportation Federal Aviation Administration

NE-06-03 October 18, 2005 http://www.faa.gov/aircraft/safety/alerts/SAIB This is information only. Recommendations aren’t mandatory.

NOTE: We’ve clarified the make and model reference before mailing this SAIB. This SAIB applies to all “269 series”. All other information is correct.

Introduction

This Special Airworthiness Information Bulletin alerts you, owners and operators of Schweizer Aircraft Corporation, Model 269 series rotorcraft, that Schweizer Aircraft plans to release a revised version of the Model 269C Maintenance Instructions (HMI) Appendix C, with some revisions to the inspection procedures for the part number 269A5103 Main Rotor Transmission Pinion.

Reference Documentation

The following references provide guidance regarding strut inspection:

• Schweizer Helicopter Maintenance Instructions (HMI) Appendix C, for the different variants of the Model 269 Series as listed below:

Model Published 269A, A-1, B, and C September 13, 2005 269C serial number 1809 and subsequent September 13, 2005 269C-1 September 12, 2005 269D September 13, 2005 269D Configuration A September 13, 2005

Background

We have received reports that operators are having difficulty following current procedures.

The revised HMI incorporates revisions to the inspection procedures for part number 269A5103. These revisions are to clarify inspection procedures in order to better detect and correct wear of the pinion.

Recommendation

We strongly recommend that you strictly adhere to the maintenance intervals specified in the HMI. Failure to do so could cause accelerated wear of the pinion, which could lead to excessive wear and premature failure of the pinion.

For Further Information Contact

James Delisio, Aerospace Engineer, FAA New York ACO, ANE-171, 1600 Stewart Ave, Suite 410, Westbury, N.Y. 11590; phone:

(516) 228-7321; fax: (516) 794-5531;

email: james.delisio@faa.gov

Schweizer Aircraft Corporation, 1250 Schweizer Road, Horseheads, NY 14845;

phone: (607) 739-3821; fax: (607) 796-2488.