What was found
DURING A ROUTINE PRE-INSPECTION ENGINE RUN-UP, THE MX TECH DISCOVERED THAT THE ENGINE WAS RUNNING ROUGH AND WAS UNABLE TO REACH STATIC RPM. THE TECH ALSO NOTED LOW EGT ON CYLINDERS NR 1 AND NR 5. THE CYLINDER NR 1 AND NR 5 EXHAUST VALVE ROCKER COVERS AND EXHAUST VALVE SPRINGS WERE REMOVED, AT WHICH POINT IT WAS DISCOVERED THAT THE NR 1 AND NR 5 EXHAUST VALVES WERE BINDING AND COULD NOT BE MOVED FREELY BY HAND. A BORESCOPE INSP WAS PERFORMED ON CYLINDERS NR 1 AND NR 5 AND NO EVIDENCE OF CONTACT BETWEEN THE EXHAUST VALVE AND PISTON WAS FOUND. A BORESCOPE INSP WAS THEN PERFORMED ON THE REMAINING CYLINDERS AND NO FURTHER EVIDENCE OF CONTACT BETWEEN THE EXHAUST VALVES AND PISTONS WERE FOUND. THE EXHAUST VALVE ROCKER COVERS AND EXHAUST VALVE SPRINGS WERE REMOVED FROM THE REMAINING CYLINDERS AND ALL OF THE REMAINING EXHAUST VALVES MOVED FREELY. IAW TECH SUPPORT INSTRUCTIONS, CYLINDER NR 1 (S/N: AC10EA128) AND NR 5 (S/N: AC10EA124) WERE REMOVED, SENT TO AN AUTHORIZED SERVICE CENTER FOR WARRANTY REPAIR, AND REINSTALLED.