What was found
AFTER VISUAL INSPECTION, RT MLG FOUND HAS A GALLED BUSHING ON RETRACTION TRUNNION SLEEVE. FOUND THE AREA OF THE PITTING ON THE SLEEVE. AREA IS WIDTH APPROX 2 CM AROUND THE SLEEVE. PERFORMED IAW RECOMMEND TO REMOVE THE BRONZE TRANSFER WITH SCOTCHBRITE , THE CORROSION ON SLEEVE AND BUSHING WERE NOT FOUND. ASSEMBLED USING A LIGHT COAT OF GREASE AND THEN LUBRICATE THE JOINT WITH MIL-PRF-32014 GREASE; ENSURE THERE IS SQUEEZE OUT AT LEAST SIX LOCATIONS ON THE AFT SIDE AND 2 ON THE FWD SIDE OF THE RETRACT ARM. LUBRICATE THIS IS JOINT EVERY 30-45 DAYS WITH MIL-PRF-32014 GREASE. DISASSEMBLE AND INSPECT THE PITTED AREA AT THE NEXT "C" CHECK AND REPORT FINDING TO MFG FOR FURTHER DISPOSITION.