What was found
WE WERE RECENTLY NOTIFIED OF A QUALITY ISSUE REGARDING ADJUSTER P/N ADJ009. IN OUR INITIAL INVESTIGATION WHICH IS ON-GOING WE’VE CONFIRMED AS OF 11/12/2019 THERE IS A DIMENSIONAL NON-CONFORMANCE WITH STAMPED SLOTS (2X) WITHIN THE CROSS BAR (ABI-HW-198). THE SLOTS SHOULD MEASURE .145 +/- .005. THEY WERE FOUND TO BE TAPERED AND UNDERSIZED ON ONE END OF THE SLOT. THIS CONDITION CAN CAUSE A FIT ISSUE WITH THE MATING PLASTIC COVER. THIS CAN POTENTIALLY LEAD TO THE ADJUSTER FAILURE.