What was found
EXHAUST RISER FROM CYLINDER BLOWN THROUGH ON 2 STACKS. ONE STACK RISER HAS APPROXIMATELY 1.50 INCH HOLE AND ONE WAS ABOUT .50 INCH. HOLES CAUSED FROM EXHAUST HEAT DETERIORATION.
- Difficulty date
- September 20, 1995
- Submitted
- March 26, 2000
- Operation
- General aviation
- Filed by
- FC6R530N
Helicopter Maintenance Corporation - Aircraft
- N234RD
- Make and model
- Beech B60
- Aircraft serial
- P566
- System (JASC)
- 7810 · Engine Collector/Tailpipe/Nozzle
- Part
- Exhaust Riser
- Condition
- Hole Blown
- Location
- Exhaust System
- Part time
- 826 hours
- Stage of operation
- IN
- Nature of condition
- O
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.