What was found
DURING SCHEDULED INSPECTION, MAINTENANCE OBSERVED THE RUDDER TRIM NUT TO HAVE GROOVES WORN INTO THE NUT ON BOTH ENDS WHERE THE NET ATTACHED TO THE RUDDER BAR. THE RUDDER NUT PASSES THROUGH TWO ARMS ATTACHED TO THE RUDDER BAR. ACTUATION OF THE RUDDER TRIM CAUSES THE NUT TO APPLY PRESSURE FORE AND AFT ON THE RUDDER BAR. THE ARMS THAT THE NUT ATTACHES TO ARE MADE OF 15 GAUGE 4130 STEEL. SUBMITTER RECOMMENDS INCREASING SURFACE BEARING AREA AND/OR INSERTION OF BEARING MATERIAL TO DISTRIBUTE LOADS.