As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.
What was found
LEFT MAIN GEAR MAXERET COVERS CUT ALMOST IN TWO. CAUSE: MAIN WHEEL AXLE NUT RETAINING BOLT PN DHS1426-5DD NOT INSTALLED CORRECTLY. BOLT IS SUPPOSED TO BE CUT AT INSTALLATION TO CLEAR INSIDE OF MAXERET COVER. HOWEVER, THE MM IS NOT CLEAR. IT DOES NOT SAY TO CUT BOLT AT INSTALLATION AND WHEN NEW BOLTS ORDERED FROM I.P.C., IT COMES TOO LONG.