SDR 98ZZZX1436

Service difficulty report · Spring · Bell 206L1

Difficulty date
March 1, 1998
Submitted
March 26, 2000
Operation
General aviation
Make and model
Bell 206L1
Part
Spring
Part number
206040106001
Condition
Mismanufactured
Location
M/R Drive
Stage of operation
IN
Nature of condition
W
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

CUSTOMER STATED THE SPRINGS SUBMITTER SUPPLIED WERE 'TOO SHORT'. THE SPRING HAD BEEN PURCHASED NEW FROM BELL HELICOPTERS IN FEBRUARY, 1998, AND SHIPPED TO THE CUSTOMER. SUBMITTER INSPECTED TWO SPRINGS THAT WERE IN STOCK AND FOUND THE SPRINGS TO MEASURE 1.838 INCH AND 1.850 INCH, BELOW THE SPECIFIED HEIGHT OF 1.900 PLUS OR MINUS 0.020 INCH PER THE BHT1 206B SERIES CR&O, PARA 63-4-22 AND 1.900 INCH PLUS OR MINUS 0.010 INCH PER 206L SERIES CR&O, PARA 63-122-7. THIS HAS BEEN REPORTED TO BELL HELICOPTERS.

More about the Bell 206L-1