What was found
INTERCOSTAL ASSEMBLY HAS DAMAGE AS SHOWN ON SKETCH INTERCOSTAL CRACKED IN TWO LOCATIONS, BS 1112 AND 1128. CLEAN UP DAMAGE, ROUTE OUT CRACK, REMOVED ALL SHARP EDGES, VERIFY CRACKS COMPLETELY REMOVED. FABRICATE REPAIR PARTS FROM 301 .5 HARD, .050 INCH. FINISH WITH TWO COATS B195 10-11 PRIMER. APPLY ALODINE AND PRIMER TO ALL BARE ALUMINUM SURFACES. INSTALL ALL FASTENERS AND REPAIR PARTS WET WITH BMS 5-95 SEALANT. REFER TO FIGURE FOR REPAIRS CONFIGURATION AND FASTENER TYPES. (M)