What was found
DURING C22 MAINTENANCE CHECK AT HAECO AMERICAS, WHILE ACCOMPLISHMENT OF SRM 53-00-01, FIGURE 201, REPAIR 12, MAINTENANCE STATED THAT FASTENERS (AT FRAME/SHEAR-TIE LOCATIONS, STA. 1395 AND STA. 1417) ON THE LOWER SKIN IS TOO CLOSE TO THE EDGE OF THE UPPER SKIN MAKING HOLES ON REFERENCED SRM (-3) FILLER TO HAVE NO EDGE MARGINS ON THE HOLES. THE SRM REQUIRES A MINIMUM OF 2D EDGE MARGIN. REFERENCE PARA. SRM 2.F. STATED TO HAVE A MINIMUM OF 2D EDGE MARGINS ON “ALL” REPAIR PARTS. ALSO, SRM PARA. 2.D., STATED 4D-6D SPACING. REPAIR WAS COMPLETED PER ABX-REA-5360-64927-00.