Service difficulty report · Floorbeam · Cndair CL6002C10

Difficulty date
February 23, 2010
Submitted
February 26, 2010
Operation
Air carrier
Aircraft
N730EV
Make and model
Cndair CL6002C10
Aircraft serial
10141
Aircraft time
15,186 hours, 10,312 cycles
Engine
Ge CF348C1
Part
Floorbeam
Condition
Corroded
Location
Bs 280
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

ON INSP, FOUND 280 BEAM TO BE CORRODED OUT OF LIMITS. EO 700-53-0061 ITEM 3 CUT OUT DAMAGED 280 LT AND RT BEAM SECTIONS. REMOVED FS 280 FLOORBEAM FASTENERS IAW SRM 51-42-06 AND 51-42-21 TO COMPLETELY REMOVE DAMAGED BEAM SECTIONS FOR REPLACEMENT. CUT FLOORBEAM AS SHOWN IN REO 670-53-11-047 PER NOTE 1. IAW NOTE 2 OF REO 670-53-11-047 AND EO 700-53-0061 ITEM 4, PERFORMED ET INSP OF CUT LINE ON FLOORBEAM IAW REO670-53-11-047 AND EO700-53-0061 IAW NDTM PART 1, 51-20-006. NO INDICATED NOTED AT THIS TIME. -2 & -3 FABRICATED DOUBLERS REQUIRED IAW NDTM PART 1, 51-20-006 OR PART 1,