What was found
(AUS) TAIL ROTOR DRIVE SHAFT COUPLING SPLINES WORN 0.3556MM (0.014 INCH) BELOW MINIMUM DIMENSIONS.
- Difficulty date
- March 18, 1998
- Submitted
- March 26, 2000
- Operation
- General aviation
- Make and model
- Bell 47G3B
- System (JASC)
- 6510 · Tail Rotor Drive Shaft
- Part
- Drive Shaft
- Part number
- 47644232101
- Condition
- Worn
- Location
- Tail Rotor
- Stage of operation
- IN
- Nature of condition
- O
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.