Service difficulty report · Hinge Bracket · Beech A200

Difficulty date
June 5, 2003
Submitted
June 5, 2003
Operation
General aviation
Aircraft
N7247Y
Make and model
Beech A200
Aircraft serial
BC03
Aircraft time
13,600 hours, 11,061 cycles
Part
Hinge Bracket
Part number
1016200131
Condition
Corroded
Location
Elevator
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

MECH NOTICED (PAINT BUBBLING) ON LT AND RT, MIDDLE ELEVATOR HINGE. FURTHER INVESTIGATION BY SCRAPEING-OFF PAINT BUBBLE, CORROSION WAS FOUND. ATTEMPT WAS MADE TO CLEAN AND TREAT AREA, FOUND THAT MORE YOU TRIED TO CLEAN CORROSION, MORE METAL WAS BEING REMOVED IN PROCESS. FLAKING, CORROSION WAS TOO DEEP INTO METAL OF HINGE BRACKET. NEW HINGE BRACKET WAS ORDERED AND AFFECTED PART WAS REPLACED. A/C WAS RE-PAINTED OVER TWO YEARS AGO. WE HAVE FOUND IT DIFFICULT TO SPOT THESE (BUBBLED PAINT) AREAS. REPLACEMENT OF AFFECTED PART. IT IS ADVISED THAT OPERATORS OF AIRCRAFT PAY PARTICULAR ATTENTION ELEVATOR HINGE BRACKETS AT THEIR NEXT MAINT INSP.

More about the Beech A200