Service difficulty report · Bearing · Bell 206B

Difficulty date
January 30, 2005
Submitted
March 3, 2005
Operation
General aviation
Make and model
Bell 206B
Aircraft time
12,833 hours
Engine
Allsn 250C20
Part
Bearing
Part number
DW4
Condition
Seized
Location
Tail Rotor
Part time
13,427 hours
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

(CAN) UPON INSPECTION OF THE LONG TAIL ROTOR PITCH CHANGE TUBE THE WALKING BEAM WAS OBSERVED TO BE A LITTLE RATCHETY TO ROTATE EVEN THOUGH IT ONLY ROTATES ABOUT 30 DEGREES OF TRAVEL. UPON THIS INSPECTION THE PART WAS REMOVED AND FURTHER INSPECTED. THE BEARING WAS ROTATED IN ORDER TO FREE IT UP AND AS MOVEMENT PROGRESSED IT GOT TIGHTER AND FINALLY SEIZED. TOOK THE WALKING BEAM TO A MFG SERVICE CENTER FOR BEARING REPLACEMENT AND EVEN THOUGH MFG SHOWS THE PART IN THE IPC. THE BEARING IS NOT A REPLACEABLE ITEM. A NEW WALKING BEAM WAS ORDERED AND WILL BE INSTALLED.

More about the Bell 206B