What was found
(CAN) THE LOWER CONTROL COLUMN IS MIS-MANUFACTURED AT THE BOTTOM TORQUE TUBE. THE STOP BOLT INSERTS AND CABLE QUADRANT SUPPORTS WERE MIS-LOCATED DURING MANUFACTURE OF THE ASSEMBLY. FINAL ASSEMBLY PROBLEMS WILL OCCUR.
- Difficulty date
- April 5, 2005
- Submitted
- May 2, 2005
- Operation
- General aviation
- Make and model
- Dhav DHC6
- System (JASC)
- 2701 · Control Column Section
- Part
- Control Column
- Part number
- C3CF39519
- Condition
- Mismanufactured
- Location
- Cockpit
- Stage of operation
- IN
- How discovered
- 9
- Nature of condition
- O
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.