What was found
(CAN) MAG WAS RECEIVED FOR 500 HR INSP. WHEN MAG WAS DISASSEMBLED, SMALL NYLON ROTOR GEAR WAS FOUND TO BE SITTING TOO HIGH AND RUBBING AGAINST THE DISTRIBUTOR GEAR. BOTH GEARS HAD A SMALL AMOUNT OF WEAR AT THE WEB AREA AT THE END OF THE GEAR TEETH. ROTOR WAS PRESSED INTO THE BRGS APPROX. .015" TO .020" UNTIL IT SEATED PROPERLY AND THE BRGS WERE INSPECTED FOR ROTATION AND ROUGHNESS. REST OF 500 HR INSP WAS CARRIED OUT AND MAG WAS RETURNED TO SERVICE.