What was found
(CAN) WHILE REPLACING #2 BRAKE ASSEMBLY, THE RETAINING BOLTS WERE FOUND TO HAVE MISSING PLATING AND HEAVY PITTING. ALL 5 BOLTS WERE REPLACED. NOTE: THERE IS NO SPECIFIC REQUIREMENT IN THE AMM 32-43-26 FOR INSPECTION OF THESE BOLTS DURING BRAKE ASSEMBLY REPLACEMENT ONLY A REFERENCE TO Ï¿½ MAKE SURE THAT THE BOLTS ARE CLEANÏ¿½. HOWEVER THERE IS A REFERENCE IN THE BRAKE MANUFACTURER (MEGGITT) CMM 32-43-96 TO PERFORM NDT INSPECTION OF THESE BOLTS AT EACH BRAKE OVERHAUL. AS PER THE AMM THESE BOLTS STAY WITH THE AIRFRAME DURING A BRAKE CHANGE SO THE OVERHAUL NDT INSPECTION FOR THE BOLTS IS NOT CAPTURED.