What was found
(CAN) A THERMAL VARIATION IN A FORGE FURNACE WAS IDENTIFIED WITH THE LT SIDE OF THE FURNACE BEING 5 DEGREE C HIGHER THAN THE REMAINDER OF THE FURNACE. THIS RESULTED IN PARTS WITH AN OVERHEATED STRUCTURE IAW SPECIFICATION CPW 534.
- Difficulty date
- April 2, 2015
- Submitted
- August 5, 2015
- Operation
- General aviation
- Engine
- Pwc PW150A
- System (JASC)
- 7230 · Turbine Engine Compressor Section
- Part
- Impeller
- Condition
- Vibrates
- Location
- Engine
- Stage of operation
- IN
- How discovered
- 9
- Nature of condition
- O
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.