Service difficulty report · Beam · Airbus A320211

Difficulty date
December 16, 2012
Submitted
December 19, 2012
Operation
Air carrier
Aircraft
N310NW
Make and model
Airbus A320211
Aircraft serial
121
Aircraft time
68,007 hours, 30,286 cycles
Part
Beam
Part number
D5227902820400
Condition
Corroded
Location
Emergency Exit
Stage of operation
IN
How discovered
O
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

DURING INSPECTION, FOUND FWD LT OVERWING EMERGENCY EXIT DOOR CURVED BEAM HAS CORROSION. REMOVED CORROSION FROM CURVED BEAM IAW SRM 51-74-00 AND CHECK LIMITS ORIG THICK .039" AFTER REWORK .033" MAT. LOSS .006" NO ESTABLISH LIMITS IN SRM. BLENDED AREA L=5.5" W=3.5" D=.006" IAW SRM 52-20-00, TABLE 103. RECEIVED NEW CURVED BEAM, PN D5227902820400 BATCH NR 0002370531. INSTALLED NEW CURVED BEAM IAW SRM 51-42-11 AND 52-20-00, FIG 201.

More about the Airbus A320-211