What was found
IN REF TO CARD AD A.A. 5530-01048-03: PERFORM PERMANENT REPAIR (VERTICAL STABILIZER SPLICE BAND). SUMMARY OF NRC-00504: 48 HOLES OF VERTICAL STABILIZER LEADING EDGE STA ZFS=52.267. WERE MEASURED AND 26 HOLES OF 1/4" DIAMETER AND 5 HOLES OF 3/16" DIAMETER WERE FOUND OUT OF LIMITS. THEREFORE, THESE HOLES WERE REAMED AND BUSHINGS WERE FABRICATED AND INSTALLED IN ACCORDING WITH B717-200 SRM 55-30-01-2R, REPAIR 6. DUE TO ARE ONLY ALLOWED 24 HOLES, IT WAS NECESSARY TO MAKE A REPAIR. REPAIR DOUBLER WAS FABRICATED PER SERVICE GENERAL REPAIR DRAWING SG95550001 REV B AND INSTALLED PER B717-200 SRM 55-30-01-2R, REPAIR 7, AND AD 5530-01048-03. PERFORM DVI INITIAL EACH 4400 CYCLES AND REPETITVE 4400 CYCLES PER B717 SRM 55-30-01-2R-7 PAR 5. A. (LP #2760596)