What was found
DURING A C-CHECK, VERTICAL FIN BASE COMPOSITE PANEL LT SIDE BELOW AND FWD OF THE NR 2 ENGINE CHANGE FIXTURE CAVITY WITH DENTS. CUT OUT 3 EA SHARP DENTED AREAS APPROX 2.25 X .5 INCH, 2.25 X .5 INCH & 1 DIA. FABRICATED 2 EA FILLERS APPROX 2.25 X .5 INCH & 1 EA FILLER APPROX 1 INCH DIA AND 2 EA DOUBLERS APPROX 4 INCH DIA & 9 X 3.75 INCH FROM 2024-T3 .016 PO 900962. CLEANED, PREPPED, APPLIED ADHESIVE PRIMER & ADHESIVE TO ALL REPAIRS SURFACES FOR BONDING. BONDED, CLEANED, TREATED, PRIMED & SEALED REPAIR. ALL MAINTENANCE ACTIONS ACCOMPLISHED IAW B727 SRM 55-30-1 FIG 2, 51-40-6 FIG 2, 55-30-2 FIG 1 & 51-40-20 FIG 30.