What was found
REPORT 1 OF 2 FLAP SYS 1 & 2 FAULT ON APPROACH, CYCLED FLAPS, RAN QRH. DID NOT GAIN NORMAL FLAPS. TROUBLESHOOTING IN WORK BITE DISPLAY FAULT CODE NR 1 SFCC FLAP 00111(FAULT CODE NOT LISTED ON TSM) NR 2 SFCC FLAP 01111 (JAMMED) NR 1 SFCC SLAT 00010 ( LT KRUGER RETRACT S/W) NR 2 SFCC SLAT 00010 (LT KRUGER RETRACT S/W) RESET FAULT ON SFCC NR 1 AND 2 AND BITE TEST CHECKS NORMAL. OPERATED FLAT/SLAT WITH MOTORING BOTH ENGINE FROM FULL UP TO 20 UNIT FLAP TAKE 50 SECONDS AND NO FAULT NOTED. TROUBLESHOT IAW TSM 27-50-02 CHECKED TORQUE LIMITER INDICATOR WAS NOT ACTIVATED. CHECKED SLAT TORQUE LIMITERS FOUND NO RED FLAG WAS ACTIVATED. AS A PRECAUTION, R & R NR 1 AND NR 2 SLAT FLAP CONTROL COMPUTERS REF AMM 27-51-18-04 AND TSM 27-50-00, ALL CHECKED NORMAL. WITH BOTH ENGINES RUNNING, EXTENDED/CYCLED SLAT/FLAPS SEVERAL TIMES THRU 15,20 AND 40, DEGREES WITH NO BINDING OR DEFECTS FOUND/NOTED. ASSYMETRY NORMAL, ACFT OK FOR SERVICE.