What was found
DURING WALK AROUND, FOUND RT FOLDING NOSE DROP A LITTLE BIT, FURTHER TROUBLESHOOTING FOUND HINGE BRACKET ASSEMBLY BROKEN APART. THE HINGE BRACKET REF TO IPC 27-81-33-01 ITEM 310.FOLDING NOSE BENT & CRACKED, NEED TO REPLACE. FURTHER INSPECTION FOUND THE LEADING WING SKIN BENEATH THE NR 1 SLAT & FOLDING NOSE WAS TEAR & CRACK ABOUT 6 INCH LONG & 2.5 INCH WIDTH. ALSO SEAL BROKEN ON THE FOLDING NOSE, RIB ALSO DAMAGED IAW SRM 57-41-11-001 FIG 4 SHEET 1 ITEM 150, STATION 5.65. RIB REPAIRED & EDGE REINFORCEMENT FABRICATED PER SRM. NEW LE D SKIN PANEL ALONG WITH RIB & EDGE FITTED. FOLDING NOSE & IT'S SPRING ROD HARDWARE - FITS & CLEARANCE INSPECTION - COMPLIED WITH SATIS. NEW FIX SKIN INSTALLED BY VENDOR PER SRM 57-41-11-201 PARAGRAPH 4A. 1. NEW SPRING ROD. 2. NOSE FOLDING ASSEMBLY. 3. NOSE FOLDING BRACKET. 4. TSI CREATED FOR GAP & WING IN-OUT STEP CHECKS BET SPRING ROD FAIRING PLATE / SLAT SURFACE / FOLDING NOSE. ITEM 1, 2. 3 PARTS AVAIL IN HAND & ALL ALONG WITH 4 - ASSIGNED TO C/OUT DURING ONGOING 'C' CHECK.