What was found
BEARING MISMANUFACTURED. INCORRECT POSITION OF GREASE INLET RELATIVE TO BOLT CUT-OUTS ON BARREL (GREASE INLET ON BOTTOM OF BARREL WHEN INSTALLED). UNABLE TO INJECT GREASE INTO BARREL WHEN INSTALLED.
- Difficulty date
- August 2, 1999
- Submitted
- March 26, 2000
- Operation
- General aviation
- Make and model
- Bell 206L3
- System (JASC)
- 6220 · Main Rotor Head
- Part
- Trunnion
- Part number
- 206011105001
- Condition
- Mismanufactured
- Location
- Main Rotor
- Stage of operation
- IN
- Nature of condition
- W
- Precautionary procedure
- K
As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.