What was found
SUPPORT ANGLES FOR L/H AND R/H CREW SEAT BACK LOWER PANELS WERE INSTALLED 3/16" TOO FAR FORWARD. SUPPORT ANGLES FOR AFT CENTER DOOR POST WERE INSTALLED 3/16" TOO FAR FORWARD. SUPPORT ANGLE FOR LOWER AFT CENTER BROOM CLOSET VERTICAL ANGLES WERE ALSO INSTALLED 3/16" TOO FAR FORWARD. TUB ALSO DOES NOT HAVE HOLES CUT FOR LOCATION OF POSITION LIGHTS. REPLACED SUPPORT ANGLES AS REQUIRED PER NORDAM MRR#08957. LOCATED AND CUT 1.5" HOLES FOR POSITION LIGHTS AND HARD POINTED AS REQUIRED PER BHT SERVICE INSTRUCTION # 206-47 FIGURE 1-6.