As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.
What was found
LOADER REPORT LOWER AFT CARGO R/H SIDE NEAR DOORWAY FLOOR PANEL EDGE DAMAGE 1. I.A.W. 767-300F SRM 53-00-50-2R-0 REV. 95 PERFORM REPAIR AS BELOW STEP. :CUT OUT THE DAMAGE AND CLEAN. MEASURE THE CUT OUT ( L : 3.7", W : 0.9", AT AFT EDGE, 3.5" FROM R/H EDGE ). APPLY THE COMPOUND TO THE CUT OUT AREA CURED AT 125°F FOR 3 HOURS. BOND THE REPAIR PLIES WITH RESIN CURED AT 170°F FOR 2 HOURS WITH A MINIMUM VACUUM OF 20 IN/HG. CONDITION CHECK IS SATISFACTORY.