Service difficulty report · Beam · Cndair CL6002C10

Difficulty date
October 8, 2010
Submitted
October 13, 2010
Operation
Air carrier
Aircraft
N617QX
Make and model
Cndair CL6002C10
Aircraft serial
10130
Aircraft time
18,794 hours, 13,767 cycles
Engine
Ge CF348C1
Part
Beam
Condition
Cracked
Location
Bs 280
Stage of operation
IN
How discovered
9
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

C4 CHECK - FS 280 RR BEAM IS CRACKED, LT BEAM NEEDS PAINT. REMOVED FASTENERS ON BS 280 BEAM IAW SRM 51-42-06-001-001-A01 AND SRM 51-42-21-001-001-A01 AND SRM 51-42-12-001-001-A01. CUT BEAM TO SIZE IAW REO 670-53-11-047. PERFORMED LPI ON 280 BEAM , NO CRACKS FOUND AT THIS TIME IAW LPI NDTM 51-20-008-230-A01 REO 670-53-11-047. REMOVED BEAM AND INSTALLED NEW BEAM IAW REO 670-53-11-047. PRIMED AND TOP COATED ALL FASTENERS IAW SRM 51-25-06-001-001-A01 AND 51-25-16-001-001-A01. APPLIED CORROSION INHIBLITING COMPOUND TO ALL AFFECTED AREAS IAW SRM 51-21-11-001-001-A01. TOP COATED LT BEAM AS REQUIRED AND APPLIED CORROSION INHIBITING COMPOUND ALL WORK DONE IAW SRM 51-25-16-001-001-A01 AND 51-21-11-001-001-A01.