Service difficulty report · Attach Fitting · Cndair CL6002C10

Difficulty date
October 18, 2010
Submitted
October 18, 2010
Operation
Air carrier
Aircraft
N617QX
Make and model
Cndair CL6002C10
Aircraft serial
10130
Aircraft time
18,794 hours, 13,767 cycles
Engine
Ge CF348C1
Part
Attach Fitting
Condition
Corroded
Location
Bs 333 S26-27r
Stage of operation
IN
How discovered
9
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

C4 CHECK - DURING INSP FOUND CORROSION FRAME ATTACH FLANGE AT FS 333 BETWEEN STR 26R & 27. BLENDED CORROSION ON ATTACH FLANGE AT FS 333.00 BETWEEN STR 26R & 27 IAW SRM 51-21-06-001-001-A01. REMOVED .004 MATERIAL, ORIGINAL MATERIAL .050, REMAINING MATERIAL .046, FOUND TO BE A NOT DAMAGE ALLOWED AREA IAW SRM 53-21-06-101-002-A01. REMOVED RIVETS FOM IAW SRM 51-42-06-001-001-A01. PERFORMED ECI ON BLENDED AREA, NO CRACKS OR CORROSION FOUND AT THIS TIME IAW NDTM ECI 51-20-006-250-A01. ENGINEERING REQUEST SENT, RECEIVED REO FROM MFG. AREA IS ACCEPTABLE AS IS IAW REO 670-53-21-596. TREATED IAW SRM 51-21-11-001-001-A01. APPLIED TOPCOAT AND CORROSION PREVENTATIVE COMPOUND IAW SRM 51-25-16-001-001-A01 AND 51-21-11-001-001-A01. ALL WORK DONE IAW HORIZON AIR TASK CARD REO670-53-21-596.