What was found
LOWER FUS.CENTER WING SUPPORT ANGLE WORN O/B OF R/H A/C AIR EXHAUST DUCT / [01] REMOVED LOWER FUS.CENTER WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-02-0G-0;[02] LOCATED AND DRILLED NEW WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-05-0G-0;[03] VERIFIED STEPS 1 AND 2;[04] OK TO TREAT AND PRIME HOLES;[05] TREATED AND APPLIED PRIMER AT LOWER FUS.CENTER WING SUPPORT ANGLE IN REF SRM 51-20-01-0G-0;[06] VERIFIED STEP 5;[07] OK TO INSTALL ANGLE SUPPORT;[08] INSTALLED LOWER FUS.CENTER WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-02-0G-0;[09] VERIFIED STEP 8;[10] OKTO CAP SEAL;[11] INSTALLED CAP-SEAL AT FASTENERS IN REF SOPM 20-50-19;[12] VERIFIED STEP 11;[13] OK TO TOP COAT AREA;[14] APPLIED TOP-COAT AT SUPPORT ANGLE IN REF SRM 51-20-=01-0-G-0;[15] REMOVED LOWER FUS.CENTER WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-02-0G-0;LOCATED AND DRILLED NEW WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-05-0G-0;NSTALLED LOWER FUS.CENTER WING SUPPORT ANGLE O/B OF R/H A/C AIR EXHAUST DUCT IN REF SRM 51-40-02-0G-0;INSTALLED CAP-SEAL AT FASTENERS IN REF SOPM 20-50-19 AND APPLIED TOP-COAT AT SUPPORT ANGLE IN REF SRM 51-20-01-0-G-0;[16] VERIFIED STEP 14 AND 15