What was found
FLOOR PANEL 241DF UPPER SURFACE HAS PULLED STRANDS. / [01] IDENTIFIED PANEL 241DF MATERIAL IAW SRM 53-00-50-0I-1 FIGURE 4 TABLE 4 <BR><BR>DUE TO EXTENT OF DAMAGE NEW FLOOR BOARD WILL BE FABRICATED FROM RAW STOCK IAW SRM 53-00-50-2R-0 PAR.1 A (NOTE)<BR><BR>FABRICATED NEW FLOOR BOARD FROM BMS4-23 TYII LOT#1496138-1; INSTALLED (42EA) THROUGH INSERTS USING BMS5-107 LOT#AK1KP9159K IAW SRM53-00-50-2R-0 PAR.5 S(1) AND BOEING DWG 144A5810-128<BR><BR>INSERTS STILL NEED CURE;[02] CURED INSERT RESIN UNDER HEAT LAMP USING THERMOMETER ID: ATS2209 DUE: 10/2022; TO VERIFY TEMPERATURE; PART MARKED PANEL AND APPLIED FOAM TAPE IAW DRAWING 143A5810 SHEET 128 AND SRM 53-00-50-2R-0 PARAGRAPH 4;[03] VERIFIED CORRECTIVE ACTION #2<BR>VERIFIED MEASUREMENTS