What was found
FLOOR PANEL 242AF UPPER SURFACE HAS PULLED STRANDS.<[01] IDENTIFIED PANEL MATERIAL IAW SRM 53-00-50-0I-1 SHEET 1; FIGURE 4; TABLE 4; AND DWG DOC: 144A5810 ID: 0189<BR><BR>PANEL UPPER SURFACE DAMAGE EXCEEDS ALLOWABLE DAMAGE LIMITS IAW SRM <BR>53-00-50-1A-1 PAR. 4. C. & F. DUE TO THE SEVERITY OF DAMAGE FABRICATING NEW FLOORBOARD IAW SRM 53-00-50-2R-0 PAR. 1. A. NOTE: <BR><BR>FABRICATED NEW FLOOR BOARD USING BMS4-17 TY 6 LOT# 1526676-1; SANDED EDGES; LOCATED AND DRILLED ALL INSERT HOLES AND CLEANED FOLLOWING DWG DOC:144A5810 ID: 0189 IAW SRM 53-00-50-2R-0 PAR. 4.A.(1) TABLE 204 AND PAR. 5. E. (1) NEED TO INSTALL INSERTS.;[02] INSTALLED ALL INSERTS USING BMS5-107 EPIBOND 420 LOT# AK2KP8383K-1 AND CURED UNDER HEATLAMP MONITORED BY THERMOMETER ID: ATS2209 CAL/DUE: 10/2023; IAW SRM 53-00-50-2R-0 PAR. 5. S. (1) (D) - (H). INSTALLED PLACARDS PART MARKED AND COMPLETED IAW SRM 53-00-50-2R-0 DWG DOC: 144A5810 ID: 0189;[03] VERIFIED CORRECTIVE ACTIONS 1 AND 2<BR><BR>VERIFIED MEASUREMENTS TABLE;[04] UPLOADED CURE SHEET. JOB COMPLETE.;[05] VERIFIED CORRECTIVE ACTION 4