What was found
FLOOR PANEL 242CF UPPER SURFACE HAS PULLED STRANDS.<[01] PART/MATERIAL IDENTIFIED PER SRM 53-00-50-0I-1 FIGURE 4 TABLE 4 SECTION 44. <BR>UPPER SURFACE DAMAGE EXCEEDS THE ALLOWABLE LIMITS AS GIVEN IN SRM 53-00-50-1A-1 PARA 4 SECTION. 44.<BR>DAMAGED FLOOR PANEL WILL BE REPLACED IAW SRM 53-00-50-2R-0 PARA 1. A. NOTE:;[02] USING BMS4-23 TYPE II GILFLOOR PANEL MATERIAL LOT 1525675-1 FABRICATED A NEW PANEL TRIMMED & LOCATED INSERT FASTENER HOLES BY BACK DRILLING THROUGH THE DEFECTIVE PANEL & USING THE DWG 144A5810-6 FOR FASTENER LOCATION & IDENTIFICATION. THROUGH INSERTS SL5107A3-410.<BR>INSTALLED THE INSERTS USING BMS5-107 ADHESIVE LOT AK2KP8383K-1 THEN CURED IAW SRM 53-00-50-2R-0 PER FIGURE 213 PAGE 30. REF CAL TOOL THERMOMETER ID ATS2402 CAL DUE 07/2023.<BR>APPLIED THE APPLICABLE PART MARK & INSTALLED BMS8-283 FOAM TAPE PER DWG 144A5810-6 .;[03] VERIFIED CORRECTIVE ACTIONS 1 AND 2<BR><BR>VERIFIED MEASUREMENTS TABLE;[04] UPLOADED CURE SHEET. JOB COMPLETE;[05] VERIFIED CORRECTIVE ACTION 4