What was found
FLOOR PANEL 241TF UPPER SKIN HAS AREAS OF PULLED STRANDS.<[01] IDENTIFIED FLOOR PANEL 241TF MATERIAL IAW SRM 53-00-50-0I-1 FIGURE 5 TABLE 5. MOST OF THE UPPER SURFACE HAS LARGE AREAS OF PULLED STRANDS OR DELAMINATION. AREAS EXCEED ALLOWABLE DAMAGE LIMITS 53-00-50-1A-1 PARAGRAPH 4.F. FLOOR PANEL 241TF DAMAGE TO UPPER SURFACE IS BEYOND ECONOMICAL REPAIR AND MAY BE REPLACED IAW 53-00-50-2R-0 PARAGRAPH 1.A NOTE.<BR><BR>ROUGH CUT A NEW FLOOR PANEL USING BMS4-23 TY2 LOT#1525675-1. LOCATED INSERT HOLES AND COUNTERBORED HOLES IAW SRM 53-00-50-2R-0 PARAGRAPH 4.A(2); AND PARAGRAPH 5.S(1)(A-D); AND BAC DWG 146A5810 ID:0467.;[02] INSTALLED INSERTS USING BMS5-107 LOT# AK2KP8383K-1 AND CURED USING THERMOMETER ID: ATS2209 CAL DUE: 10/2023. APPLIED TAPE BMS 8-283 LOT# 0CN000057073; AND PART MARKED AS REQUIRED. IAW SRM 53-00-50-2R-0 PARAGRAPH 5.S(1)(E-H) AND BAC DWG 146A5810 ID:0467;[03] VERIFIED CORRECTIVE ACTIONS 1 AND 2<BR><BR>VERIFIED MEASUREMENTS TABLE;[04] CURE SHEET UPLOADED.<BR><BR>JOB COMPLETE;[05] JOB COMPLETE.