What was found
DISBOND - SKIN, #5 SPOILER UPPER SURFACE T/E FOUND DISBOND(<P>1. CUT OUT THE DISBOND AND CLEAN MEASURE THE CUTOUT (L = 5.5", W = 3", 32.5" FROM OUTBD EDGE AT T/E) INSTALL THE REPAIR CORE WITH COMPOUND, CURED AT 250 DEGREE FAHRENHEIT FOR 90 MINUTES WITH MINIMUM VACUUM OF 22 IN/HG AND BOND THE EXTERNAL DOUBLERS WITH FILM ADHESIVE. CURE AT 250 DEGREE FAHRENHEIT FOR 90 MINUTES WITH MINIMUM OF 22IN/HG IAW SRM 57-70-02-2R-1 REV 96, SRM 51-70-10-2R-4 REV 96 AND SRM 51-70-10-2R-0 REV 96. 2. CONDITION CHECK IS GOOD</P>)