Service difficulty report · Fitting · Boeing 747121

Difficulty date
September 8, 2001
Submitted
October 22, 2001
Operation
Air carrier
Aircraft
N681UP
Make and model
Boeing 747121
Aircraft serial
19661
Aircraft time
97,510 hours, 25,124 cycles
Part
Fitting
Condition
Corroded
Location
Fuselage
Stage of operation
IN
How discovered
V
Nature of condition
O
Precautionary procedure
K

As reported to the FAA. Reports are unverified, and codes are left as the FAA publishes them.

What was found

INSPECTION TYPE:C FX EXTERIOR LT S38L DRAG FITTING MOUNT BOLT HOLES FOUND CORROSION AT BS 980 - 990 AREA. LT S38L DRAG FTG 3 CORROSION BOLT HOLES AT BS 980 - 990 AREA CLEANED UP AND INSTALLED WITH 3 SLEEVE BOLTS. ALSO 1 SKIN AREA ATTACHMENT BOLT ADJACENT FWD SLEEVE BOLT AREA WAS REPLACED BY ANOTHER SLEEVE BOLT TO PREVENT INTERFERENCE PROBLEM AS PER HX RS NR R 53-43-34686 SPLICE FITTING REPAIR REQUIREMENT.