Copy · Eurocopter ASB 04A005 Rev 0 · 8 pages

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2014-0105; AD 2016-12-13 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

TextPartly OCR

Some pages are OCR from a scan. OCR can misread letters and numbers.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = 'beffede21c4d581302d1eea46acb8d0707a563935cb6e3dfbf35e8b9cc3adad5'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 1/8 2003.07.16

EUROCOPTER

DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE CIVIL VERSION(S): B

ALERT SERVICE BULLETIN No. 04A005 SUBJECT: LIMITATIONS Engine Mount

LIST OF APPROVED

REVISIONS REVISION No. 0

APPROVED Not applicable Date: July 15, 2003

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 2/8 2003.07.16

1. PLANNING INFORMATION

1.A. EFFECTIVITY For engine mounts made up of:

- a engine mounting base more than 10.5 mm high (dimension H on Figure 1),

- support arms, P/N C714A1107201,

- swaged support arms, P/N C714A1106201,

- one LH support bracket, P/N C714A1101102,

- one RH support bracket, P/N C714A1101103.

IMPORTANT

1) This ALERT SERVICE BULLETIN does not apply to aircraft having a serial number equal to or above 1170.

2) This ALERT SERVICE BULLETIN does not apply to aircraft that have been modified in compliance with Service Bulletin No. 71-003.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON To declare any engine mount, made up of the parts listed in paragraph 1.A., non-airworthy.

This ALERT SERVICE BULLETIN will form the subject of a DGAC Airworthiness Directive.

1.D. DESCRIPTION Various tests conducted recently at the EUROCOPTER works have revealed that the engine mount definition specified in paragraph 1.A., may in certain cases induce excessive loading on the coupling tube.

One case of cracks resulting from this excessive loading has been reported in service. These loads are mainly due to:

- the initial "closed mounting base" type assembly, which, after installation, does not enable operators to check that all the components are correctly assembled,

- a binding phenomenon resulting from wear on the components, and more particularly, on the washers on the inner diameter of the mounting base.

EUROCOPTER has therefore decided to declare this installation non-airworthy according to the instructions specified in paragraph 1.E.

EUROCOPTER reminds you that an improved installation of the engine mount exists as described in Service Bulletin No. 71-003.

In addition, compliance with Service Bulletin No. 71-003 enables operators to extend the inspection interval and the service life limit of the coupling tube (refer to Revision 2 of ALERT SERVICE BULLETIN No. 05A003).

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 3/8 2003.07.16

1.E. COMPLIANCE

1.E.1. At the works

- On new aircraft: Not applicable. The components specified in paragraph 1.A are no longer installed on aircraft with S/N 1170 onwards.

- On spares: Comply with paragraph 2.B.2. before delivery.

1.E.2. Retrofit action: By the operator.

- On aircraft: Flights with engine mounts made up of the components defined in paragraph 1.A. will be prohibited from June 30, 2004 onwards. Consequently:

- Comply with paragraph 2.B. during the next scheduled inspection, but at the latest by June 30, 2004.

- On spares: Contact EUROCOPTER for replacement of the components specified paragraph 1.A., held as spares.

1.F. APPROVAL Approval is limited to civil version helicopters subject to an Airworthiness Directive.

The technical information contained in this ALERT SERVICE BULLETIN was approved on July 15, 2003 under the authority of DGAC Design Organisation Approval No. F.JA01.

1.G. MANPOWER Qualification: 1 mechanic.

Time: Approximataly 15 minutes.

1.H. WEIGHT AND BALANCE Weight: Not applicable.

Moment: Not applicable.

1.I. EFFECT ON ELECTRICAL LOADS Not applicable.

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 4/8 2003.07.16

1.J. SOFTWARE MODIFICATION EMBODIMENT STATE Not applicable.

1.K. REFERENCES EC 120 Service Bulletin No. 71-003.

Aircraft Maintenance Manual (AMM) Task 71-10-00, 4-1.

1.L. OTHER DOCUMENTS CONCERNED Not applicable.

1.M. INTERCHANGEABILITY AND MIXABILITY OF PARTS Not applicable.

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 5/8 2003.07.16

2. ACCOMPLISHMENT INSTRUCTIONS

2.A. GENERAL Not applicable.

2.B. OPERATIONAL PROCEDURE

2.B.1. Preliminary Steps:

- Open the upper cowlings as per AMM Task 71-10-00, 4-1.

2.B.2. Checking the engine mounting base As per Figure 1:

- Measure the height (H) of the engine mounting base (1).

. if the height (H) of the mounting base (1) is equal to or less than 10.5 mm:

- leave as is and resume flights, . if the height (H) of the mounting base (1) is more than 10.5 mm:

- install an engine mount that is not covered by the restriction specified in paragraph 1.E.2.

NOTE

1) Compliance with Service Bulletin No. 71-003 waives compliance with the instructions given in paragraph 1.E.2.

2) Compliance with Service Bulletin No. 71-003 extends the monitoring intervals and the service life limit of the engine-to-MGB coupling tube, (refer to Revision 2 of ALERT SERVICE BULLETIN No. 05A003).

2.B.3. Final steps

- Close the upper cowlings as per AMM Task 71-10-00, 4-1.

2.C. IDENTIFICATION Record compliance with this ALERT SERVICE BULLETIN in the aircraft documents.

2.D. OPERATING AND MAINTENANCE INSTRUCTIONS Not applicable.

Page 6OCROpen in PDF

eurocopter an EADS Company ALERT SERVICE BULLETIN EC120 Figure 1 Approved under DGAC DOA No. F.JA01 04A005 Page 6/8 2003.07.16

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 7/8 2003.07.16

3. MATERIAL INFORMATION

3.A. MATERIAL - COST - AVAILABILITY For all information, contact the Customer Support Sales Department.

3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.

3.C. MATERIAL REQUIRED FOR EACH AIRCRAFT, ENGINE/COMPONENTS Not applicable.

3.D. MATERIAL REQUIRED FOR EACH SPARE PART Not applicable.

3.E. RE-IDENTIFIED PARTS Not applicable.

3.F. TOOLING - COST - AVAILABILITY Not applicable.

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 8/8 2003.07.16

3.G. PROCUREMENT CONDITIONS Order the required quantity:

from

EUROCOPTER Etablissement de Marignane Direction VENTES Service Client S.C.

13725 MARIGNANE CEDEX France NOTE 1 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4 42 85 99 96 NOTE 2 On the purchase order, please specify the mode of transport, the destination and the serial number of the aircraft to be modified.

4. APPENDIX None.

ALERT SERVICE BULLETIN EC120 Approved under DGAC DOA No. F.JA01 04A005 Page 8/8 2003.07.16

3.G. PROCUREMENT CONDITIONS Order the required quantity:

from

EUROCOPTER Etablissement de Marignane Direction VENTES Service Client S.C.

13725 MARIGNANE CEDEX France NOTE 1 For ALERT SERVICE BULLETINS, order by:

Telex: HELICOP 410 969F Fax: +33 (0)4 42 85 99 96 NOTE 2 On the purchase order, please specify the mode of transport, the destination and the serial number of the aircraft to be modified.

4. APPENDIX None.