On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 9
From the PDF’s text layer: layout, tables and figures are lost. The PDF is the document. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2012-0177; AD 2012-16-02 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a12b6880991f764391e39b9f9efeffb85d599ec64469f855508ccce1002369c1' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = 'a12b6880991f764391e39b9f9efeffb85d599ec64469f855508ccce1002369c1' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
Approved under EASA DOA No. 21J.056 Page 1/9 2009.06.24 This document is available on the internet: www.eurocopter.com/techpub
EUROCOPTER
DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE
EMERGENCY
ALERT SERVICE BULLETIN
DAUPHIN NUMBER VERSIONS Civil: B, B1 EC155 04A009
SUBJECT: LIMITATIONS
Limitation concerning the use of VIP 4-seat benches
ATA: 25
REVISION NUMBER DATE OF APPROVAL DATE OF ISSUE
Revision 0 On: March 30, 2009 2009.03.30
Revision 1 On: June 23, 2009 2009.06.24
Approved under EASA DOA No. 21J.056 Page 2/9 2009.06.24
CAUTION
THE INFORMATION AND INSTRUCTIONS
CONTAINED IN THIS ALERT SERVICE BULLETIN
ARE INTENDED FOR MAINTENANCE PERSONNEL AND FLIGHT CREWS.
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters/installed equipment
Helicopters fitted with VIP 4-seat benches P/N 365V85-0045-01 and P/N 365V85-0046-01 that are convertible into 3-seat benches (see Figure 2 - Details A and B) with a serial number below 6893.
Helicopters embodying modification kit 365V080079.01 (modification to the rear bench) and/or modification kit 365V080079.02 (modification to the front bench) which form the subject of Service Bulletin No. 25-095, are not concerned by this ALERT SERVICE BULLETIN.
1.A.2. Non-installed equipment
Not applicable.
1.B. ASSOCIATED REQUIREMENTS
Not applicable.
1.C. REASON
To limit the use of the VIP benches, mentioned in paragraph 1.A.1., to the 3-seat configuration.
This ALERT SERVICE BULLETIN formed the subject of EASA Airworthiness Directive No. 2009-0078-E.
The purpose of Revision 1 is to inform the oper ators that helicopters embodying modification kit 365V080079.01 and/or modification kit 365V08007 9.02 (introduced through Service Bulletin No. 25-095) are not concerned by the instructions of this ALERT SERVICE BULLETIN.
Revision 1 of this ALERT SERVICE BULLETIN will form the subject of Revision 1 of EASA Airworthiness Directive No. 2009-0078-E.
Approved under EASA DOA No. 21J.056 Page 3/9 2009.06.24
1.D. DESCRIPTION
Within the scope of new customization work consisting in installing a VIP bench seat, EUROCOPTER noted that the load strength of the fixed parts of the installation did not meet the statutory requirements.
EUROCOPTER has validated the return to conformity of the installation, and a modification enabling the bench attachments on the cabin floor to be strengthened in order to re-establish the 4-seat capability, will soon be proposed to you.
Pending this modification, EUROCOPTER limits the use of VIP seat benches to the 3-seat configuration.
1.E. COMPLIANCE
EUROCOPTER renders compliance with th is ALERT SERVICE BULLETIN, mandatory.
1.E.1. Compliance at the works
1.E.1.a. On helicopters
Before delivery, comply with paragraph 2.
1.E.1.b. On non-installed equipment
Not applicable.
1.E.2. Compliance in service: By the operator
1.E.2.a. On helicopters/installed equipment
Comply once with paragraph 2. of this ALERT SERVICE BULLETIN at the latest at the next flightrelated inspection scheduled at 15 hours or 7 days (first limit reached).
1.E.2.b. On non-installed equipment
Not applicable.
Approved under EASA DOA No. 21J.056 Page 4/9 2009.06.24
1.F. APPROVAL
Approval is limited to civil version helicopters subject to an Airworthiness Certificate.
1.F.1. Approval of the modifications
Not applicable.
1.F.2. Approval of the ALERT SERVICE BULLETIN
The technical information given in Revision 0 of this ALERT SERVICE BULLETIN was approved on March 30, 2009 under the authority of EASA Design Organisation Approval No. 21J.056.
The technical information given in Revision 1 of this ALERT SERVICE BULLETIN was approved on June 23, 2009 under the authority of EASA Design Organisation Approval No. 21J.056.
1.G. MANPOWER
1.G.1. Qualification
1 Mechanic.
1.G.2. Time for the operations
15 minutes.
1.G.3. Estimated helicopter grounding time
Not applicable.
1.H. WEIGHT AND BALANCE
Not applicable.
1.I. EFFECT ON ELECTRICAL LOADS
Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT RECORD
Not applicable.
1.K. REFERENCES
Not applicable.
Approved under EASA DOA No. 21J.056 Page 5/9 2009.06.24
1.L. OTHER DOCUMENTS AFFECTED
Not applicable.
1.M. TOOLING AFFECTED
Not applicable.
1.N. INTERCHANGEABILITY AND MIXABILITY OF PARTS
Not applicable.
Approved under EASA DOA No. 21J.056 Page 6/9 2009.06.24
2. ACCOMPLISHMENT INSTRUCTIONS
2.A. GENERAL
Not applicable.
2.B. OPERATIONAL PROCEDURE
2.B.1. Preliminary steps
Remove the foam material from the seat bases of the benches, if necessary.
2.B.2. Converting the VIP 4-seat bench into a 3-seat bench
As per Figure 1:
- Unlock the upper harness (1) from its position and secure it in place of harness (3).
- Unlock the upper harness (2) and retain it until the VIP bench attachments are strengthened.
- Unlock the lower harness (5) from the two atta chment points (a) and (b) and retain it until the VIP bench fixed parts are strengthened.
- Unlock the lower harness (6) from the two atta chment points (b) and (c) and secure it to the two attachment points (d) and (e).
- Unlock the lower harness (4) from the attachment point (a), and secure it to attachment point (d).
- Unlock the lower harness (7) from the attachment point (c), and secure it to attachment point (e).
NOTE
The harness attachment system is simple; unlocking and locking of the harness are ensured using a snap hook.
For benches fitted with 4 head-rests, as shown on Figure 2 - Detail A, modify the configuration in accordance with Figure 2 - Detail C:
- Remove head-rest (X) and retain it until the VIP bench attachments are strengthened.
- Relocate the head-rests (Y1), (Y2) and (Y3) in th e defined positions, as shown on Figure 2 - Detail C, in order to return to the 3-seat configuration.
2.B.3. Final steps
Fit the foam material on the seat bases of the benches, if necessary.
2.C. IDENTIFICATION
Record compliance with this ALERT SERVICE BULLETIN on the helicopter documents.
2.D. OPERATING AND MAINTENANCE INSTRUCTIONS
Not applicable.
Approved under EASA DOA No. 21J.056 Page 7/9 2009.06.24
Figure 1: VIP bench harness installations HARNESS INSTALLATION ON EC155 VIP BENCH WITH 4 PASSENGERS INSTALLATION HARNAIS SUR BANQUETTE VIP 4 PLACES SUR EC155 HARNESS INSTALLATION ON EC155 VIP BENCH WITH 3 PASSENGERS INSTALLATION HARNAIS SUR BANQUETTE VIP 3 PLACES SUR EC155
Approved under EASA DOA No. 21J.056 Page 8/9 2009.06.24
DETAIL A DETAIL B
DETAIL C VIP bench in the 3-seat configuration
Figure 2 Y1 Y2 Y3 X
Approved under EASA DOA No. 21J.056 Page 9/9 2009.06.24
3. MATERIAL INFORMATION
3.A. MATERIAL: PRICE AND AVAILABILITY
3.A.1. Cost
Not applicable.
3.A.2. Availability
Not applicable.
3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT
Not applicable.
3.C. MATERIAL REQUIRED FOR EACH HELICOPTER/ENGINE/COMPONENT
3.C.1. Kit(s) or component(s) to be ordered for one helicopter or one assembly
Not applicable.
3.C.2. Material to be ordered separately
Not applicable.
3.D. PROCUREMENT CONDITIONS
Not applicable.
4. APPENDIX
Not applicable.