Service bulletin · Airbus Helicopters

Revision 4Airbus-Helicopters-EASB-05A051-Rev-4 · 20 pages · 798 KB

© Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0015; AD 2022-24-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Docket FAA-2022-0015 (document 0012) · AD 2022-24-12

Manufacturer
Airbus Helicopters
Type
Emergency Alert Service Bulletin
Number
05A051
Latest revision known
05A051, Revision 4, dated February 28, 2022

A newer revision may exist than any OpenAirDocs knows of: check with the manufacturer.

On this page

ADs that cite it · 3

Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.

Also cited in 2 proposed ADs.

Text · 20OCR

This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2022-0015; AD 2022-24-12 incorporates this document by reference. Not covered by OpenAirDocs’ CC0 dedication.

Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license
  FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256)
  WHERE p.file_sha256 = '966ed8d621c24a7d31169d74a7b848b484fb7b320389d0ade72e9ee41b6cdeda'
  ORDER BY p.page"

Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.

Page 1OCROpen in PDF

AIRBUS HELICOPTERS

EMERGENCY

ALERT SERVICE BULLETIN

PROTECTIVE MEASURE

TIME LIMITS-MAINTENANCE CHECKS-MAIN ROTOR HUB Visual checks of the yokes of the rotating swashplate ATA 62 For the attention of HELICOPTER(S) Version(S) NUMBER CONCERNED Civil Military EC225 05A051 LP EC725 05A046 AP Revision No. Date of issue Revision 0 2017-09-22 Revision 1 2017-11-16 Revision 2 2019-02-26 Revision 3 2021-12-07 Revision 4 2022-02-28 Summary:

The purpose of this ALERT SERVICE BULLETIN is to periodically check that there are no cracks on the control rod attachment points of the rotating swashplate.

To improve the detection of cracks, this ALERT SERVICE BULLETIN renders stripping of certain areas of the control rod attachment points of the rotating swashplate mandatory.

This ALERT SERVICE BULLETIN introduces an SLL (Service Life Limit) of 13 years for the rotating swashplate.

Reason for last Revision:

Revision 4 of this ALERT SERVICE BULLETIN:

- Update the Service Life Limit (SLL) of the rotating swashplate from 12 years to 13 years.

- Update the list of Serial Numbers (S/N) and manufacture dates of the rotating swashplate.

- Ask the return of the rotating swashplate removed to Airbus Helicopters.

Compliance:

Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.

Revision 0 2017-09-22 Page 1/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 2OCROpen in PDF

AIRBUS HELICOPTERS

1. PLANNING INFORMATION

1.A. EFFECTIVITY

1.A.1. Helicopters/installed equipment or parts Helicopters equipped with a rotating swashplate part number 332A31-3074-00 or 332A31-3074-01.

1.A.2. Non-installed equipment or parts Rotating swashplates part number 332A31-3074-00 or 332A31-3074-01.

1.B. ASSOCIATED REQUIREMENTS Not applicable.

1.C. REASON Airbus Helicopters has identified during testing that the EC225 LP / EC725 AP rotating swashplate may develop cracks over time in the area of the control rod attachment point, as a result of an aging phenomenon. This testing has been conducted in line with Airbus Helicopters Type Certificate Holder obligations and commitment to Safety. While no cracks have ever been identified on this part in service, Airbus Helicopters renders periodic checks of swashplates reference number 332A31-3074-00 or 332A31-3074-01 that are 7 years old or older since manufacture mandatory.

NOTE 1 The former swashplate part number 332A31-3076-00 is not concerned.

Purpose of Revision 1:

The purpose of revision 1 of this ALERT SERVICE BULLETIN is to update the tables in the appendices for the following reasons:

- remove the part number and serial number association, the rotating swashplate part number 332A31-3074-00 were amended in 332A31-3074-01 following the modification embodiment 0743728,

- update some serial numbers and production dates of rotating swashplates as a result of further analysis.

In addition, the purpose of revision 1 of this ALERT SERVICE BULLETIN is to clarify the procedures.

Revision 1 calls into question the application of revision 0 of this ALERT SERVICE BULLETIN Revision 0 2017-09-22 Page 2/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 3OCROpen in PDF

AIRBUS HELICOPTERS Revision 2:

The purpose of revision 2 of this ALERT SERVICE BULLETIN is to:

- introduce an SLL of 12 years for the rotating swashplates and to request feedback if cracks and/or corrosion are discovered

- update the list in Appendix 4. by adding the serial numbers and manufacture dates of the rotating swashplates manufactured between 10/10/2005 and 17/09/2018.

NOTE 2 The list of serial numbers and manufacture dates of the rotating swashplates will be completed before 2022.

Revision 2 supersedes compliance with previous revisions of this ALERT SERVICE BULLETIN Revision 3:

Revision 3 of this ALERT SERVICE BULLETIN update the Appendix 4.A. with the Serial Numbers (S/N) and the manufacture date for the rotating swashplates made between 20/05/2019 and 20/08/2021.

Revision 3 of this ALERT SERVICE BULLETIN has no effect on the application of the former revisions of this ALERT SERVICE BULLETIN.

Revision 4:

Revision 4 of this ALERT SERVICE BULLETIN:

- Update the Service Life Limit (SLL) of the rotating swashplate from 12 years to 13 years.

- Update the list of Serial Numbers (S/N) and manufacture dates of the rotating swashplate.

- Ask the return of the rotating swashplate removed to Airbus Helicopters.

Revision 4 of this ALERT SERVICE BULLETIN has an effect on the application of the former revisions of this ALERT SERVICE BULLETIN.

1.D. DESCRIPTION This ALERT SERVICE BULLETIN consists in:

- Periodically making sure that there are no cracks in the attachment yokes of the rotating swashplate pitch rods.

- Stripping certain zones of the attachment yokes of the rotating swashplate pitch rods to improve the detection of cracks.

- Introducing an SLL of 13 years for the rotating swashplate.

- Sending back the rotating swashplate removed to Airbus Helicopters.

1.E. COMPLIANCE

1.E.1. Compliance at H/C manufacturer level Airbus Helicopters makes compliance with the instructions of paragraph 3. of this ALERT SERVICE BULLETIN mandatory, taking into account the condition described in paragraph 1.E.2.

Revision 0 2017-09-22 Page 3/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 4OCROpen in PDF

AIRBUS HELICOPTERS

1.E.2. Compliance in service Helicopters/installed equipment or parts:

Airbus Helicopters renders compliance with this ALERT SERVICE BULLETIN mandatory.

The work on the helicopter is to be performed by the operator.

Upon receipt of Revision 0 of this ALERT SERVICE BULLETIN:

- Identify on the Log Card of the Mast or the MRH, the part number and the serial number (S/N) of the rotating swashplate.

- Then using Appendix 4.A., identify the manufacture date of the rotating swashplate.

NOTE 3 The rotating swashplates that have a manufacture date after 20/08/2021 are not yet concerned with the ageing phenomenon. The list of S/Ns with a manufacture date after 20/08/2021 will be completed later.

. As soon as the rotating swashplate is seven years old or older since manufacture, apply the following:

.. Comply with paragraph 3.B.2.a. of this ALERT SERVICE BULLETIN.

... within the 15 flight hours or 7 days (the first limit reached is applicable) that follow reception of the ALERT SERVICE BULLETIN revision 0, issued at the date indicated at the bottom of the .... Every 15 flying hours or 7 days (the first limit reached is applicable).

.. Comply with paragraph 3.B.2.b. of this ALERT SERVICE BULLETIN within 100 flying hours following receipt of the ALERT SERVICE BULLETIN revision 0, issued on the date indicated at the bottom of the page.

Upon receipt of Revision 2 of this ALERT SERVICE BULLETIN:

- Identify, on the Log Card of the Mast or the MRH, the part number and the serial number (S/N) of the rotating swashplate.

- Report through an email to TechnicalSupport.Helicopters@airbus.com with the following title swashplate S/N in accordance with ALERT SERVICE BULLETIN No. 05A051 (EC225) or No. 05A046 (EC725)":

. S/N of the helicopter,

• P/N, S/N and TSN (FH) of the rotating swashplate.

- Then, using Appendix 4.A., identify the date of manufacture of the rotating swashplate.

. If the rotating swashplate was manufactured 12 years and 9 months ago or more:

.. comply with paragraph 3.B.2.c. of this ALERT SERVICE BULLETIN within 3 months as from receipt of revision 2 of this ALERT SERVICE BULLETIN, issued on the date indicated at the bottom of the page, .. contact Airbus Helicopters as soon as possible to set up the replacement of the rotating swashplate, as per paragraph 2.B If the rotating swashplate was manufactured less than 12 years and 9 months ago:

.. comply with paragraph 3.B.2.c. of this ALERT SERVICE BULLETIN once 13 years have passed since manufacture, .. contact Airbus Helicopters before 13 years have passed since manufacture to set up the replacement of the rotating swashplate, as per paragraph 2.B.

Revision 0 2017-09-22 Page 4/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airb shelicopters.com/techpub/

Page 5OCROpen in PDF

AIRBUS HELICOPTERS Non-installed equipment or parts:

Upon receipt of Revision 2 of this ALERT SERVICE BULLETIN:

- Report through an email to TechnicalSupport.Helicopters@airbus.com with the following title swashplate S/N in accordance with ALERT SERVICE BULLETIN No. 05A051 (EC225) or No. 05A046 (EC725)":

• P/N, S/N and TSN (FH) of the rotating swashplate.

Before installation:

- Identify the manufacture date of the rotating swashplate as per Appendix 4.A.:

NOTE 4 The rotating swashplates that have a manufacture date after 20/08/2021 are not yet concerned with the ageing phenomenon. The list of S/Ns with a manufacture date after 20/08/2021 will be completed later.

. If the date of manufacture is less than 7 years ago:

.. install the rotating swashplate on the helicopter, . If the date of manufacture is between 7 and 13 years ago:

.. comply with paragraph 3.B.2.b. of this ALERT SERVICE BULLETIN, If the date of manufacture is more than 13 years ago:

.. send back the rotating swashplate (a), refer to paragraph 2.D.

1.F. APPROVAL Approval of modifications:

Not applicable.

Approval of this document:

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on September 22, 2017 under the authority of EASA Design Organization Approval 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on September 22, 2017 under the prerogatives of the recognition of design capability FRA210-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 0 was approved on September 22, 2017 by the Airbus Helicopters Airworthiness Department for export military versions.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on November 16, 2017 under the authority of EASA Design Organization Approval 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on November 16, 2017 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 1 was approved on November 16, 2017 by the Airbus Helicopters Airworthiness Department for export military versions.

Revision 0 2017-09-22 Page 5/20 Revision 4 • 2022-02-28 This document is available on the internet: https://www.airb icopters.com/techpub/

Page 6OCROpen in PDF

AIRBUS HELICOPTERS The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on February 26, 2019 under the authority of EASA Design Organization Approval 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on February 26, 2019 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 2 was approved on February 26, 2019 by the Airbus Helicopters Airworthiness Department for export military versions.

The technical information contained in this ALERT SERVICE BULLETIN Revision 3 was approved on December 03, 2021 under the authority of EASA Design Organization Approval 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 3 was approved on December 03, 2021 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 3 was approved on December 03, 2021 by the Airbus Helicopters Airworthiness Department for export military versions.

The technical information contained in this ALERT SERVICE BULLETIN Revision 4 was approved on February 25, 2022 under the authority of EASA Design Organization Approval 21J.700 for helicopters of civil versions subject to an Airworthiness Certificate.

The technical information contained in this ALERT SERVICE BULLETIN Revision 4 was approved on February 25, 2022 under the prerogatives of the recognition of design capability FRA21J-002-DGA for French Government helicopters.

The technical information contained in this ALERT SERVICE BULLETIN Revision 4 was approved on February 25, 2022 by the Airbus Helicopters Airworthiness Department for export military versions.

1.G. MANPOWER For compliance with this ALERT SERVICE BULLETIN, Airbus Helicopters recommends the following personnel qualifications:

Qualification:

- 1 Technician.

The time for the operations is given for information purposes, for a standard configuration.

Time for the operations:

- 8 hours for the Technician (excluding drying time)

- 0.25 hour (for the visual check).

The time for the operations is given for information purposes, for a standard configuration.

The helicopter downtime is estimated at 1 day, excluding drying time.

1.H. WEIGHT AND BALANCE Not applicable.

Revision 0 2017-09-22 Page 6/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 7OCROpen in PDF

AIRBUS HELICOPTERS

1.I. POWER CONSUMPTION Not applicable.

1.J. SOFTWARE UPGRADES/UPDATES Not applicable.

1.K. REFERENCES The documents required for compliance with this ALERT SERVICE BULLETIN are as follows:

Aircraft Maintenance Manual (MMA):

MMA: 24-00-00-611: General Instructions - General, MMA: 62-00-00-611: Safety and General Maintenance Instructions - Airtrame, MMA: 62-20-00-021: Removal Main Rotor Assembly - MAIN ROTOR MAST ASSEMBLY, MMA: 62-20-00-061: Removal-Installation of the mast bearing and the swashplate - Equipped main rotor MMA: 62-20-00-421: Installation Main Rotor Assembly - MAIN ROTOR MAST ASSEMBLY, MMA: 62-23-00-062: Pitch-Change Rod Removal-Installation - Control System, Standard Practices Manual (MTC):

MTC: 20.02.07.403: Use of Vernelec 43022 VARNISH - Electrical bonding, MTC: 20.02.09.101: Crack detection - Crack detection through dye-penetrant inspection: General - Detection of cracks, MTC: 20.02.09.601: Check of the structural components and parts using the dye-penetrant method - Detection of cracks, MTC: 20.04.01.102: Use of cleaning products on individual parts and on aircraft - Cleaning, MTC: 20.04.03.401: General method for reconditioning corroded metal surfaces - Corrosion inhibiting and removal procedures, MTC: 20.04.04.403: Touch-up of protective treatment with ALODINE 1200 - Surface treatment before MTC: 20.07.02.201: Helicopter parked in a repair shop - Safety instructions, MTC: 20.07.03.406: Instructions applicable when working on an aircraft electrical circuit and power generating systems - Technical instructions, MTC: 20.07.03.408: Appearance checks on an aircraft after an inspection or repair - Technical instructions, MTC: 20.90.03.101: Control methods - Corrosion detection.

Information Notices (IN):

IN: 3481-1-00: The Marketplace: an AirbusWorld Ordering service IN: 3643-I-00: Introduction of the digital Service Bulletin reporting R-Tex

1.L. OTHER AFFECTED PUBLICATIONS Not applicable.

1.M. PART INTERCHANGEABILITY OR MIXABILITY Not applicable.

Revision 0 2017-09-22 Page 7/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 8OCROpen in PDF

AIRBUS HELICOPTERS

2. EQUIPMENT OR PARTS INFORMATION

2.A. EQUIPMENT OR PARTS: PRICE - AVAILABILITY - PROCUREMENT Price For any information concerning the components or for assistance, contact the Airbus Helicopters Network Sales & Customer Relations Department.

Availability Delivery times will be communicated on operator's request by the Sales and Customer Relations Department.

Procurement conditions Order the required quantities from the Sales and Customer Relations Department of the Airbus Helicopters Network:

Airbus Helicopters Etablissement de Marignane Direction Ventes et Relations Client 13725 MARIGNANE CEDEX France In the purchase order, write the information that follows:

- The mode of transport

- The destination.

- The serial numbers of the helicopters to change.

2.B. LOGISTIC INFORMATION As soon as possible and without exceeding 13 years since manufacture, contact Airbus Helicopters using the email address: TechnicalSupport.Helicopters@airbus.com with the email subject title « EASB 05A051/05A046 data » and send the following information:

- S/N and TSN (FH) of the mast bearing

- S/N and TSN (FH) of the rotating swashplate bearing

- S/N and TSN (FH) of the rotating swashplate

- S/N and TSN (FH) of the non-rotating swashplate

- The next limit for inspection with removal of the equipped rotor mast, either for a detailed check, or for its return to the Airbus Helicopters network, for reaching limits published in the ALS/MSM (OTL, SLL).

Revision 0 2017-09-22 Page 8/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbu shelicopters.com/techpub/

Page 9OCROpen in PDF

AIRBUS HELICOPTERS

2.C. EQUIPMENT OR PARTS REQUIRED PER HELICOPTER/COMPONENT Equipment or parts to be ordered separately:

New Former Designation Qty Item P/N P/N → Instruction Rotating swashplate 332A31-3074-00 (1) 332A31-3074-00 When cracked or the date of or manufacture is more than 13 Rotating swashplate 332A31-3074-01 (2) 332A31-3074-01 years, send the rotating swashplate to Airbus Helicopters, refer to paragraph 2.D.

Consumables to be ordered separately:

Refer to the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN and the list below:

P/N Designation Qty СМ Item consumable Chemical conversion 1 kg ALODINE1200 324 (3) material Varnish (Vernelec 43022) 1 kg ECS2228.10 514 (4) You can order the consumables from the AirbusWorld Marketplace through e-ordering (IN No. 3481-1-00).

If you cannot get access to e-ordering, please contact your Logistic Focal Point.

Special tools:

Refer to the Work Cards and Tasks specified in this ALERT SERVICE BULLETIN and the list below:

Designation Qty Tool P/N or equivalent Item Spatula (in plastic) 1 Off the shelf (ZZ) Mallet or hammer 1 Off the shelf (УУ) Sandpaper 200/400 or 330 1 Off the shelf (хх) Sandpaper 240 1 Off the shelf (wW)

2.D. EQUIPMENT OR PARTS TO BE RETURNED Send the rotating swashplate (a) back to:

Airbus Helicopters Aéroport Marseille Provence RETEX Factory MAH09MGA2 - B1 - LES BORIES

SOUS SOL - ARRIVEE 13725 Marignane CEDEX France Revision 0 2017-09-22 Page 9/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 10OCROpen in PDF

AIRBUS HELICOPTERS

3. ACCOMPLISHMENT INSTRUCTIONS

3.A. GENERAL

- Read and comply with the general electrical instructions as per MMA Task 24-00-00-611.

- Read and comply with the safety and general maintenance instructions on the main rotor as per MMA Task 62-00-00-611.

- Read and comply with the instructions for connecting helicopters parked in a repair shop to the ground as per MTC Work Card 20.07.02.201.

- Read and comply with the instructions when working on an aircraft electrical circuit and power generating systems as per MTC Work Card 20.07.03.406.

3.B. WORK STEPS

3.B.1. Preliminary steps

- Park the helicopter in a maintenance workshop.

- Install appropriate access equipment.

- Disconnect all electrical power supplies.

- Remove all equipment and furnishings as required for access to the different work areas.

3.B.2. Procedure

CAUTION

THE STRIPPING OF THE PAINT AND THE

VERIFICATIONS OF THE ROTATING SWASHPLATE

YOKE SHALL BE CARRIED OUT IN A CLEAN AND WELL-LIT ENVIRONMENT.

3.B.2.a. Check for cracks (Figure 1) NOTE 1 Waiting for the compliance with paragraph 3.B.2.b.. the check can be performed with the presence of the paint.

As per Figure 1 On each of the five yokes:

- Make sure there are no cracks in areas (E), (F), (G), (H), (J) and (K) (Details B, C and D).

• If there are no cracks on the five yokes:

.. resume flights.

Revision 0 2017-09-22 Page 10/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 11OCROpen in PDF

AIRBUS HELICOPTERS If cracks are found:

.. replace the rotating swashplate (a) with a rotating swashplate (1) or (2) as per MMA Task 62-20-00-061 (Detail A).

.. send back the rotating swashplate (a), refer to paragraph 2.D.

NOTE 2 This intervention can only be performed by personnel that have completed a training course for this type of intervention and only with the use of the special tools.

or .. replace the mast assembly (not shown) equipped with the rotating swashplate (a) by a mast assembly (P/N 332A31-3031-XX or 332A31-3032-XX) equipped with a rotating swashplate (1) or (2) as per Tasks 62-20-00-021 (MMA) and 62-20-00-421 (MMA).

. If in doubt:

.. perform a non-destructive test (example: dye-penetrant method as per MTC Work Cards

20.02.09.101 and 20.02.09.601).

. In case of clouding of the varnish (difficulty detecting cracks), it is necessary to replace it:

.. strip the varnish in areas (E), (F), (G), (H), (J) and (K) by sanding with sandpaper 240 (ww), .. clean areas (E), (F), (G), (H), (J) and (K) as per MTC Work Card 20.04.01.102 (Details B, C and D), .. make sure there are no cracks in areas (E), (F), (G), (H), (V), and (K).

.. protect areas (E), (F), (G), (H), (J) and (K) with varnish (Vernelec 43022) (4) and as per MTC

3.B.2.b. Stripping of the yoke areas of the rotating swashplate (Figure 1) As per Figure 1

- If necessary, remove the pitch rods on the rotating swashplate side (a) as per MMA Task 62-23-00-062.

- Protect the work area to prevent paint debris from being disbursed during stripping.

- Remove the grease from zones (E), (F), (G), (H), (J) and (K) of the rotating swashplate (a) as per Work Card 20.04.04.403 (MTC).

CAUTION

USE OF A METAL TOOL TO STRIP AREAS (E), (F), (G), (H), (J) AND (K) IS PROHIBITED.

CAUTION

BE SURE NOT TO DAMAGE THE PLATE DURING

STRIPPING

- Strip areas (E), (F), (G), (H), (J) and (K) of each yoke of the rotating swashplate (a) using a spatula (zz) and a mallet or hammer (yy) (Details B, C and D).

NOTE 3 The surplus of stripping in the areas represented is authorized.

- Make sure there is no corrosion as per MTC Work Card 20.90.03.101 in areas (E), (F), (G), (H), (J) and (K) of the rotating swashplate (a).

. If there is corrosion:

.. touch up the rotating swashplate (a) as per MTC Work Card 20.04.03.401.

Revision 0 2017-09-22 Page 11/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/

Page 12OCROpen in PDF

AIRBUS HELICOPTERS

- If necessary, remove any damage in areas (E), (F), (G), (H), (J) and (K) within the limit of 0.2 mm

(0.0078 in.), by sanding with sandpaper 200/400 or 330 (xx).

- Ensure there are no cracks on the five yokes.

. If there are no cracks on the five yokes:

.. protect areas (E), (F), (G), (H), (J) and (K) using a chemical conversion material (3) and as per MTC Work Card 20.04.04.403, .. allow to dry, .. protect areas (E), (F), (G), (H), (J) and (K) using a varnish (Vernelec 43022) (4) and as per MTC Work Card 20.02.07.403, .. let varnish (Vernelec 43022) (4) overflow by 4 to 5 mm on the paint surrounding the stripped areas, .. allow to dry, If cracks are found:

.. replace the rotating swashplate (a) with a rotating swashplate (1) or (2) as per MMA Task 62-20-00-061 (Detail A).

.. send back the rotating swashplate (a), refer to paragraph 2.D.

NOTE 4 This intervention can only be performed by personnel that have completed a training course for this type of intervention and only with the use of the special tools.

or .. replace the mast assembly (not shown) equipped with the rotating swashplate (a) by a mast assembly (P/N 332A31-3031-XX or 332A31-3032-XX) equipped with a rotating swashplate (1) or (2) as per Tasks 62-20-00-021 (MMA) and 62-20-00-421 (MMA).

• If in doubt:

.. perform a non-destructive test (example : dye-penetrant method as per MTC Work Cards 20.02.09.101 and 20.02.09.601).

- Install the pitch rods on the rotating swashplate (a) (if removed in paragraph 3.B.2.b.) as per AMM Task 62-23-00-062.

- Vacuum the paint particles.

3.B.2.c. Replacement of the rotating swashplate (Figure 1) As per Figure 1

- Remove the rotating swashplate (a) as per Task 62-20-00-061 (MMA) (Detail A).

- Send back the rotating swashplate (a), refer to paragraph 2.D.

- Install a rotating swashplate (1) or (2) as per Task 62-20-00-061 (MMA) (Detail A).

NOTE 5 These interventions can only be performed by personnel that have completed a training course for this type of intervention and only with the use of the special tools.

or

- Remove the mast assembly (not shown) as per Task 62-20-00-021 (MMA) and send it to Airbus Helicopters or to an approved center for the replacement of the rotating swashplate.

- Install a mast assembly (P/N 332A31-3031-XX or 332A31-3032-XX) equipped with a rotating swashplate (1) or (2) as per Task 62-20-00-421 (MMA).

Revision 0 2017-09-22 Page 12/20 Revision 4 2022-02-28 This document is available on the internet: https://www.airbushelicopters.com/techpub/