On this page
ADs that cite it · 1
Newest first, with the revision each names, as OpenAirDocs read it from the AD’s text: check it against the AD.
Also cited in 1 proposed AD.
Text · 12OCR
This text is OCR from a scan. OCR can misread letters and numbers. © Airbus Helicopters. Filed by the FAA in regulations.gov docket FAA-2011-0448, the docket of AD 2011-21-18. Not covered by OpenAirDocs’ CC0 dedication.
Query with SQL
duckdb -csv -c "SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1f26e18a3aaeb07373cc1940d7eabd4080f22f88663b98aed564637d702ee56e' ORDER BY p.page"
Prints the whole list as CSV. It reads the release’s Parquet files over HTTPS, so there’s nothing to download first. Install DuckDB to run it.
SELECT p.page, p.text_source, p.text, f.rights_holder, f.license FROM 'https://openairdocs.org/data/latest/service_document_file_page.parquet' p JOIN 'https://openairdocs.org/data/latest/service_document_file.parquet' f USING (file_sha256) WHERE p.file_sha256 = '1f26e18a3aaeb07373cc1940d7eabd4080f22f88663b98aed564637d702ee56e' ORDER BY p.page
Run it at the DuckDB prompt, or in any tool that reads Parquet over HTTPS. More ways to query the release are on Use the data.
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
EUROCOPTER
DIRECTION TECHNIQUE SUPPORT 13725 MARIGNANE CEDEX FRANCE CIVIL VERSION(S): B
ALERT SERVICE BULLETIN No. 67A011 SUBJECT: ROTOR FLIGHT CONTROLS New Thrust Washers for Cyclic Stick Friction LIST OF APPROVED REVISIONS REVISION No. 1 APPROVED No. O: April 27, 2004 Date: October 07, 2005 Approved under EASA DOA No. 21J.056. 67A011 Page 1/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
1. PLANNING INFORMATION
1.A. EFFECTIVITY
1.A.1. Helicopters
- Helicopters whose serial number is inferior or equal to 1385.
- Helicopter serial number 8001.
NOTE This Alert Service Bulletin is integrated into the design definition of new helicopters built as from serial numbers 1386 and 8002
1.A.2. Component(s) affected
- Thrust washer, P/N C671A1006201, of the pilot cyclic stick friction device.
- Pilot cyclic stick fitted with friction device P/N C671A1007101, P/N C671A1007102 and C671A1003102.
1.B. ASSOCIATED REQUIREMENTS Not applicable.
1.C. REASON Compliance with this Alert Service Bulletin allows maintaining the friction cups of the cyclic stick in contact with the bowl in order to preclude any risk of stick jamming if the friction is loosened.
Revision 1 of this Alert Service Bulletin extends compliance to pilot cyclic stick P/N C671A1003102 and introduces further information in various paragraphs.
Revision 1 of this Alert Service Bulletin supersedes the previous Revision (change in effectivity).
Revision 1 of this Alert Service Bulletin will form the subject of an Airworthiness Directive issued by DGAC on behalf of EASA.
1.D. DESCRIPTION During a flight involving many large cyclic stick movements, the pilot felt a sudden restriction of the cyclic stick travel when moving back the stick to neutral.
The inspections revealed that the lower cup had jammed in the opening of the friction ball (bowl).
Subsequent to this incident, EUROCOPTER issued Telex Information No. 139, dated August 26, 2003.
When minimum friction tightening is ensured, as stated in the Flight Manual (FLM), there is no risk of the cup moving into the opening of the bowl and causing jamming of the stick.
Approved under EASA DOA No. 21J.056. 67A011 Page 2/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120 Nevertheless, this modification has been embodied to preclude the risk of jamming in the event of mishandling. The modification consists of replacing the existing single-piece thrust washer with two new washers. The upper thrust washer is tight fitted on the stick. In this way, the cups are maintained in contact with the bowl even if the friction has been loosened.
1.E. COMPLIANCE EUROCOPTER renders compliance with this Alert Service Bulletin mandatory.
1.E.1. At the works
1.E.1.a. On aircraft Comply with this Alert Service Bulletin prior to delivery.
1.E.1.b. On spares Prior to delivery, replace the stock of washers as per paragraph 2.B.5.b. and modify the cyclic sticks as per paragraph 2.B.5.a.
1.E.2. Retrofit action
1.E.2.a. On aircraft: by the operator
- Revision 0 Comply with paragraph 2.B., within 550 hours or 6 months (the first limit reached is applicable) following receipt of this Alert Service Bulletin Revision 0 issued on April 27, 2004.
- Revision 1 For aircraft with sticks P/N C671A1003102, comply with paragraphs 2.B. and 2.C. before late December 2005.
1.E.2.b. On spares On receipt of this Alert Service Bulletin, replace the washers held as spares in compliance with the instructions given in paragraph 2.B.5.b. and modify the cyclic sticks in compliance with paragraph 2.B.5.a.
1.F. APPROVAL Approval is limited to civil version helicopters subject to an Airworthiness Certificate.
1.F.1. Approval of modifications The information or instructions relate to Aircraft Modification Approval Form (FAM) No. A00593 which was approved on March 11, 2004 by the DGAC according to article 10.3 of .E.C. regulation 1592/2002.
Approved under EASA DOA No. 21J.056. 67A011 Page 3/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
1.F.2. Approval of the Alert Service Bulletin The technical information contained in Revision 0 of this Alert Service Bulletin No. 67A011 was approved on April 27, 2004 under the authority of DGAC Design Organisation Approval No. F.JA01.
The technical information contained in Revision 1 of this Alert Service Bulletin No. 67A011 was approved on October 07, 2005 under the authority of EASA Design Organisation Approval No. 21J.056.
1.G. MANPOWER Qualification: 1 mechanic.
Time: Approximately 3 hours.
1.H. WEIGHT AND BALANCE Negligible.
1.I. EFFECT ON ELECTRICAL LOADS Not applicable.
1.J. SOFTWARE MODIFICATION EMBODIMENT STATE Not applicable.
1.K. REFERENCES Refer to Aircraft Maintenance Manual (AMM):
Tasks: 24-00-00, 3-1; 67-00-00, 3-1; 67-00-00, 6-1 and 67-10-00, 4-1.
Refer to the Flight Manual (FLM), Section 4.
1.L. OTHER DOCUMENTS CONCERNED Illustrated Parts Catalog (IPC).
Approved under EASA DOA No. 21J.056. 67A011 Page 4/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
1.M. INTERCHANGEABILITY AND MIXABILITY OF PARTS
1.M.1. Interchangeability
- The 2 new thrust washers (P/N C671A1018201 and P/N C671A1019201) are not functionally interchangeable with thrust washer (P/N C671A1006201).
- The new stick re-identified C671A1006101 is not functionally interchangeable with the stick P/N C671A1007101.
- The new stick re-identified C671A1008101 is not functionally interchangeable with the stick P/N C671A1007102.
- The stick P/N C671A1003102 pre-Alert Service Bulletin Revision 1 is not interchangeable with the stick P/N C671A1003102 post-Alert Service Bulletin Revision 1.
1.M.2. Mixability Not applicable.
Approved under EASA DOA No. 21J.056. 67A011 Page 5/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
2. ACCOMPLISHMENT INSTRUCTIONS
2.A. GENERAL Not applicable.
2.B. OPERATIONAL PROCEDURE
2.B.1. Preliminary steps
- Comply with the General Safety Instructions - Electrical Power Supply System as per AMM Task 24-00-00, 3-1.
- Comply with the General Safety Instructions - Rotor Flight Controls as per AMM Task 67-00-00, 3-1.
2.B.2. Procedure
2.B.2.a. Removal of the cyclic stick Remove the cyclic stick as per AMM Task 67-10-00, 4-1.
| 2.B.2.b. Replacement of the thrust washer (Figure 1) On the friction device of the cyclic stick (b):
- remove and scrap thrust washer (a),
- install the 2 thrust washers (1) and (2).
2.B.2.c. Re-installation of the cyclic stick
- Install the cyclic stick as per AMM Task 67-10-00, 4-1.
- Perform a visual aspect and cleanliness check in the work area.
2.B.3. Functional tests
- Set aircraft to test configuration.
- Carry out a flight control check as per AMM Task 67-00-00, 6-1 paragraph 3.
- Carry out the functional tests of the installations and optional equipment that are controlled by the cyclic stick.
- Reconnect the electrical power supplies, if applicable.
2.B.4. Final steps Restore the aircraft to flight configuration.
Approved under EASA DOA No. 21J.056. 67A011 Page 6/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC 120
2.B.5. Spare parts
2.B.5.a. Retrofitting of cyclic sticks held as spares
- Retrofit cyclic sticks listed in paragraph 1.A.2. as per paragraph 2.B.2. and table of paragraph 3.E.
- Identify the cyclic stick assembly using a removable label on which the part number C671A1006101 (basic) or C671A1018101 (optional) is to be marked.
2.B.5.b. Replacement of (washer) stocks Replace thrust washers P/N C671A1006201 with thrust washers P/N C671A1018201 and C671A1019201.
2.C. IDENTIFICATION Record compliance with Revision 1 of this Alert Service Bulletin No. 67A011 in the aircraft documents.
2.D. OPERATING AND MAINTENANCE INSTRUCTIONS
2.D.1. Operating instruction(s) Refer to Flight Manual (FLM) Section 4.
2.D.2. Maintenance instruction(s) Not applicable.
Approved under EASA DOA No. 21J.056. 67A011 Page 7/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120 ADDS
PRE MOD
POST MOD Figure 1 Approved under EASA DOA No. 21J.056. 67A011 Page 8/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
3. MATERIAL INFORMATION
3.A. MATERIAL: COST - AVAILABILITY The material will be delivered free of charge, on customer's request.
3.B. INFORMATION CONCERNING INDUSTRIAL SUPPORT Not applicable.
3.C. MATERIAL REQUIRED FOR EACH AIRCRAFT, ENGINE/COMPONENTS
3.C.1. Kit or component(s) to be ordered Instructions New MP/N Qty Item Key Word Former P/N Disposition C671A1019201 1 Thrust washer To be C671A1018201 2 Thrust washer C671A1006201 scrapped
3.C.2. Material to be ordered separately Not applicable.
3.C.3. Ingredients to be ordered separately In accordance with the Tasks specified in this Alert Service Bulletin.
3.C.4. Material delivered by the customer Not applicable.
3.C.5. Tooling In accordance with the Tasks specified in this Alert Service Bulletin.
3.D. MATERIAL REQUIRED FOR EACH SPARE PART
3.D.1. Kit to be ordered In accordance with paragraph 3.C.1.
Approved under EASA DOA No. 21J.056. 67A011 Page 9/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
3.E. RE-IDENTIFIED PARTS Cyclic stick assembly C671A1003102 is not re-identified after compliance with this Alert Service Bulletin.
Record compliance with Alert Service Bulletin No. 67A011 Revision 1 on a removable label.
Key Word Former P/N New P/N Observation Pilot cyclic stick C671A1007101 C671A1006101 Post-ASB 67A011 Pilot cyclic stick C671A1007102 C671A1018101 Post-ASB 67A011 Pilot cyclic stick C671A1003102 C671A1013102 + ASB 67A011 Revision 1
3.F. TOOLING: COST - AVAILABILITY For all information, contact the Customer Support Sales Department.
3.G. PROCUREMENT CONDITIONS
3.G.1. Materials Order the required quantity from
EUROCOPTER Etablissement de Marignane Direction VENTES Service Client S.V.
13725 MARIGNANE CEDEX FRANCE NOTE 1 On the purchase order, please specify the mode of transport, the destination and the serial numbers of the aircraft to be modified.
NOTE 2 For ALERT SERVICE BULLETINS, order by:
Telex: HELICOP 410 969F Fax: +33 (0) 4 42 85 99 96 Approved under EASA DOA No. 21J.056. 67A011 Page 10/11 2005.10.24
eurocopter an EADS Company ALERT SERVICE BULLETIN EC120
3.G.2. Ingredients The ingredients listed in this Alert Service Bulletin and in the reference documents can be ordered from the INTERTURBINE company:
Website: http://www.itlogistics.de Telephone: +49.41.91.809.300 AOG: +49.41.91.809.444
4. APPENDIX Not applicable.
Approved under EASA DOA No. 21J.056. 67A011 Page 11/11 2005.10.24
No text on this page: it may be a figure. Open the PDF to see it.